Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 26

The Lectrosonics coaxial antenna, approximately 36 inches long with an SMA connector, is a great choice for various applications. The other end is cut to a 1/4 wavelength of the corresponding frequency block, marked with a color band and tag. It's perfect when you need a small remote antenna. This antenna is useful when you need to separate equipment from its antenna. For example, in a multichannel bag system, standard whip antennas may be less effective due to RF interference in the bag, but this coaxial antenna can be placed on the bag strap. It can also be used when clothing or other gear might affect equipment performance. Position it where it works best. Remember, for maximum effectiveness, the antenna should be vertical, either pointing up or down. Each half of the antenna is cut to 1/4 wavelength of the block. When using it, keep the antenna section away from metal surfaces, while the cable orientation doesn't affect its performance.

Using this Lectrosonics coaxial antenna is easy. First, identify the frequency block of your equipment and match it with the color - banded and tagged end of the antenna. You can place the antenna on a bag strap or other suitable locations where it won't be covered by clothing or other gear. For best results, make sure the antenna is in a vertical position, whether it's pointing up or down. When using, keep the antenna section away from metal surfaces. As for maintenance, there's not much to do. Just keep it clean and free from dirt and debris. If it gets wet, dry it thoroughly before using it again. Avoid bending the antenna too much as it might affect its performance.