Samson's Concert 288 All - in - One Wireless System is a game - changer for wireless setups. It's super easy to set up, works flawlessly, and delivers premium sound. This high - performance UHF wireless system is perfect for vocal shows, presentations, Q&A sessions, worship services, and educational events when you need two users. The dual - channel design allows up to 24 systems (48 performers) to work at the same time, depending on the region. It offers an amazing 300 - foot wireless range between transmitters and receiver, great for large stages and audience participation. To avoid interference, it has a true diversity design. If there's a signal drop, the receiver's tone key activates an Auto Mute function to cut out background noise until the signal returns. The CR288 Wireless Receiver has a user - friendly front panel for quick and easy setup. You can use two Select buttons to auto - sync the receiver and transmitter channels via infrared. The panel also has a dual 7 - segment LED for channels, two Volume knobs, two tuned antennas, and Ready and Peak indicators. At the back, there are two separate balanced XLR outputs for mixer channels and a 1/4' unbalanced mix output to combine signals for a PA speaker. The system comes with a CH288 Handheld Transmitter with a Q6 Dynamic Microphone capsule and a CB288 Beltpack Transmitter. It also includes an LM5 Lavalier Microphone and an HS5 Headset Microphone, both with locking connectors, adding maximum versatility. Each transmitter runs up to eight hours on two AA batteries and is engineered for great sound. With Samson's Concert 288, advanced tech and versatility come together for top - quality wireless performance wherever you need it. Key features include a dual - channel high - performance UHF system, 1/4' audio cable, AC adapter, and rackmount kit. It has multiple frequency options for interference - free use, separate Volume controls, and various output options. The transmitters offer long battery life and a 300 - foot range.
Using the Samson Concert 288 All - in - One Wireless System is a breeze. First, set up the CR288 Wireless Receiver. Connect it to your power source using the included AC adapter. You can use the rackmount kit to install it on a rack if you want. On the front panel, use the Select buttons to auto - sync the receiver and transmitter channels via infrared. Adjust the Volume knobs according to your needs. For the transmitters, insert two AA batteries. The CH288 Handheld Transmitter is great for holding during performances, while the CB288 Beltpack Transmitter can be worn on your belt. You can choose between the LM5 Lavalier Microphone or the HS5 Headset Microphone depending on your situation. When using the system, make sure you're within the 300 - foot operating range. If you experience a signal drop, don't worry. The receiver's Auto Mute function will kick in to stop background noise until the signal is back. For maintenance, keep the system clean. Wipe the microphones and transmitters with a soft, dry cloth. When not in use, remove the batteries from the transmitters to prevent leakage. And remember, the number of systems you can operate simultaneously depends on your region, so check the local regulations.
