Product Detail
The DPA 4166 - OC - F - B03 - LH 4166 CORE Slim Omni Flex Headset Microphone in sleek black with a 110 mm boom and 3 - pin LEMO connector is a top - notch audio device. It combines the renowned sound of the 4066 Omnidirectional Capsule with a lightweight, flexible headset system. This condenser microphone is super easy and quick to adjust, delivering clean, transparent sound with plenty of headroom. The capsule, similar to the 4066, is attached to an interchangeable boom arm. Like other mics in the range, it offers accurate, natural voice clarity and high SPL capabilities, allowing users to speak or sing without distortion. Available as an earset or headset, earset variants are great for quick setup, like in conferences, while headset variants fit securely for active performances. Both are ergonomically designed for a comfortable fit, adjusting to any ear size and head shape, and are hardly visible. You can use it on either ear by rotating the boom and earhook. The connector makes it easy to swap broken cables or wireless connectors. It's IP58 certified, with a water - repellant nano - coating, hermetic sealing of the amplifier, and dual gold - plated diaphragm. You can choose between the legacy and CORE by DPA technology. The legacy 4166 is clear, consistent, and robust, working across a wide dynamic range with low distortion. The CORE version boosts the dynamic range by 14 dB and offers an even more open and clear sound. Technical specs include an omnidirectional pattern, pressure operation, pre - polarized condenser cartridge, 20 Hz - 20 kHz frequency response, and more.
Using the DPA 4166 CORE Slim Omni Flex Headset Microphone is a breeze. First, decide whether you want to use it as an earset or a headset. If you're in a hurry, like for a conference, the earset is the way to go. Just put it on your ear and adjust the boom to the right position. For active performances, the headset is more secure. Place it around your head and make sure it's comfortable. You can rotate the boom and earhook to use it on either the left or right ear. When it comes to connecting, use the 3 - pin LEMO connector. If you need to swap a broken cable or a wireless connector, it's easy because the connector splits the cable from the microphone boom. As for maintenance, since it's IP58 certified, it's quite durable. But try to keep it away from excessive water and extreme temperatures. The temperature range it can handle is from - 40C to 45C, so don't leave it in a really hot car or out in the cold winter for too long. Also, keep the relative humidity below 90%. If you're using it with a wireless system, make sure the power supply is between 5V and 10V through the DPA adapter. With the DAD6001 - BC, you can use P48 Phantom Power starting from 12V. And that's it! Enjoy clear and high - quality audio with your new microphone.
