Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 19

The Lectrosonics 36-Inch Coaxial Antenna with SMA Connector for Block 19 is a great choice when you need a small remote antenna. It has an overall length of about 36 inches and comes with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block, marked with a color band and tag. This antenna is ideal for situations where you need to put some distance between equipment and its antenna. For example, in a multichannel bag system, standard whip antennas may be less effective due to RF interference in the gear bag, but this coaxial antenna can be placed on the bag strap. It can also be used when clothing or other gear might cover or hinder equipment performance. You can position it for maximum effectiveness. Remember, for best results, the antenna should be vertical, either pointing up or down. Also, keep the antenna section away from metal surfaces during use, while the orientation of the remaining cable doesn't affect its performance.

Using this Lectrosonics coaxial antenna is easy. First, make sure the antenna is positioned vertically, either pointing up or down. This vertical orientation will give you the best results. When setting it up, place the antenna section away from any metal surfaces. You can position it on a bag strap if you're using a multichannel bag system to avoid RF interference. Or, if clothing or other gear might cover or hinder your equipment, find a good spot for the antenna to work effectively. As for maintenance, keep it clean and dry. Check the SMA connector regularly for any signs of damage or looseness. If you notice any issues, it's a good idea to get it checked out or replaced. And always follow the safety instructions provided by the manufacturer.