Samson XPD2m Handheld Dual-Channel Digital Wireless System

The Samson XPD2m Professional Handheld Dual-Channel Digital Wireless Audio System is a game-changer for group presentations, educators, Q&A sessions, and more. It offers two channels of top-notch, uncompressed wireless audio. Operating on the 2.4GHz license-free frequency band, it's easy to set up and provides rock-solid wireless performance in a portable design. The HXD1 handheld transmitters enable a completely cordless performance, capturing vocals with crystal-clear clarity. With up to 20 hours of continuous use on two AA batteries and a 100’ wireless range, it delivers reliable results in any situation. The Q6 dynamic mic element ensures high-quality sound for singers and presenters. Setting up is a breeze. Just use the one-touch pairing to sync the transmitter and receiver channels. Connect the RXD2M to your mixer or sound system, adjust the levels, and enjoy wireless audio that rivals the quality of a wired microphone. It integrates easily into any audio system. The dual balanced XLR outputs let you route each wireless channel independently, or you can send a combined mix via the 1/4” and 1/8” mix outputs. Key Features: - High-performance dual-channel digital wireless system - Operates on 2.4GHz license-free frequency - 100’ (30m) line-of-sight operating range - RXD2M Tabletop Receiver: Dual balanced XLR outputs for separate mixer channels, 1/4' unbalanced mix output - One-touch pairing button - Separate volume controls for each channel - HXD1 Handheld Transmitters: Q6 Dynamic Microphone capsule, up to 20 hours of battery life on two AA batteries Technical Specifications: - Working Range: 100' (30m) line of sight - Working Frequency: 2.404~2.476GHz - Modulation type: GFSK - Audio Frequency Response: 20Hz - 16KHz - T.H.D.: <0.1% (@ 1KHz, -10dBu) - Signal to Noise: >85dB - Audio Output Level: 1/8' (3.5mm) & 1/4' Jack (unbalanced) - 5dBu, XLR Jack (balanced) - 5dBu - Audio Output Impedance: 1/8' (3.5mm) & 1/4' Jack (unbalanced) - 2K OHM, XLR output jack (balanced) - 4.5K OHM - RF Sensitivity: -78dBm/20dB SINAD - Operating Voltage: 5V/500mA - Product Dimensions: 4.25' (110mm) x 3.75' (95mm) x 1.5' (39mm) - Product Weight: 0.33lb (152g)

Using the Samson XPD2m system is easy. First, connect the RXD2M tabletop receiver to your mixer or sound system. Then, insert two AA batteries into the HXD1 handheld transmitter. Press the one-touch pairing button on both the transmitter and receiver to sync the channels. Adjust the volume controls on the receiver for each channel to your desired level. When using the system, make sure there are no obstructions between the transmitter and receiver as the operating range is 100’ (30m) line of sight. Keep the system away from other devices that operate on the 2.4GHz frequency band to avoid interference. For maintenance, replace the AA batteries in the transmitter when the battery life runs out. Clean the microphone capsule of the HXD1 transmitter gently with a soft brush to keep it in good condition. Store the system in a dry and cool place when not in use.