Product Detail
The DPA 4671-OC-H-B00 4671 CORE Heavy Duty Omnidirectional Microphone is perfect for situations where maximum security is needed and mic size isn't a major concern. It features a stainless - steel housing, heavy - duty cable relief, and a thick 2.2 mm cable. These mics are more robust than their original counterparts. They can withstand tough conditions, thanks to an extra - robust, Kevlar - reinforced cable and strain relief that handle daily twists, bends, and pulls in harsh environments. The 5.4 mm diameter pre - polarized condenser element with a Double Vent Protection System makes the mics highly resistant to humidity and sweat. You can modify the acoustic response by choosing the right grid. Each mic (except 4671) comes with two anodized stainless - steel grids. The Soft Boost Grid gives a 3 dB boost at 8 - 20 kHz, and the High Boost Grid offers a 10 dB boost around 12 kHz. These grids are detachable for easy cleaning. The 4671 is a great lavalier mic with a 5 dB presence boost at 4 to 6 kHz, optimized for chest placement to maximize speech intelligibility. It can handle up to 144 dB SPL before clipping. An acoustical low - cut at 100 Hz in the 4071’s capsule reduces unwanted low - frequency sound. Optional miniature mesh and fur windscreen are available. Technical specs: Omnidirectional pattern, pressure operation, pre - polarized condenser cartridge, 20 Hz - 20 kHz frequency response, etc.
Using the DPA 4671 CORE Heavy Duty Omnidirectional Microphone is easy. If you're using it as a lavalier mic, place it on your chest for the best results as it's optimized for this position. When you need to adjust the sound, pick the right grid according to your needs. The Soft Boost Grid can give a gentle boost at higher frequencies, while the High Boost Grid offers a stronger boost. Just attach the grid to the microphone. When it comes to power, for wireless systems, make sure to supply a voltage between 5V and 10V through the DPA adapter. If you're using the DAD6001 - BC, you can use Phantom Power starting from 12V. For cleaning, detach the grids and wipe off sweat, makeup, or dust. Keep the microphone away from extreme temperatures and high humidity. The working temperature range is from - 40C to 45C, and relative humidity should be up to 90%. Don't expose it to direct sunlight for a long time. When storing, make sure the cable is not overly bent or twisted. You can use the cable up to 300 m with the DAD6001 - BC XLR Adapter, but avoid pulling it too hard during use.
