Product Detail
The Point Source Audio CO-8WD-XSE-BE SERIES8 is a top - notch omnidirectional headset microphone in a stylish beige color, perfect for Sennheiser systems. It's a dual - ear headset with an under - ear mic placement. The ear loops can be reversed for left or right ear use and collapsed for easy storage and travel. The mic element has an IP 57 rating, offering excellent protection against water, sweat, and makeup. It comes with a pre - mounted microphone, cable clip, and standard - size windscreen. Key features include reversible and collapsible earhooks, suitability for both left and right wear, IP 57 water/sweat/makeup resistance, an unbreakable boom that can bend 360 degrees, a max SPL of up to 136 dB, available in beige, brown, or black, a 1 - meter cable length, and interchangeable X - Connectors compatible with popular wireless systems like Shure, Sennheiser, and Audio - Technica. Technical specs: Back Electret Condenser element, Omnidirectional pattern, 20Hz - 20kHz frequency range, - 43dB 1V/Pa sensitivity (+/- 3dB at 1kHz), 136dB SPL max, 1400 Ohm output impedance (at 1kHz), 1 - 10 V operating voltage, 4 ft. 077 in + connector cable length, and a net weight of 0.6 oz.
Using this headset microphone is easy. First, adjust the ear loops to fit your left or right ear as you prefer. The ear loops can be reversed, so you have that flexibility. Clip the cable in place using the provided cable clip. The unbreakable boom can be bent 360 degrees to position the mic exactly where you need it. When it comes to using it with wireless systems, thanks to the interchangeable X - Connectors, it works well with Shure, Sennheiser, and Audio - Technica systems. Just connect it properly and you're good to go. For storage or travel, collapse the ear loops to save space and protect the headset. Since the mic element is IP 57 rated, it can handle water, sweat, and makeup, but avoid submerging it for long periods. Clean the mic gently with a soft, dry cloth. If you notice any issues with the sound quality, check the connections and make sure the operating voltage is within the 1 - 10 V range.
