Product Detail
The DPA 4661 - OC - H - B03 4661 CORE Heavy Duty Omnidirectional Microphone is perfect for situations where high security is needed and the mic's visual size isn't a big concern. It features a stainless - steel housing, a heavy - duty cable relief, and a thick 2.2 mm (0.09 in) cable, making it a more robust version of the original mics. These microphones can handle the toughest conditions. They come with an extra - robust, Kevlar - reinforced cable and a strain relief, built to endure the daily twists, bends, and pulls in harsh environments. The 5.4 mm diameter pre - polarized condenser element with the Double Vent Protection System makes them highly resistant to humidity and sweat. You can modify the acoustic response of these mics by choosing the right grid. Each microphone (except the 4671) comes with two anodized stainless - steel grids. The Soft Boost Grid gives a 3 dB soft boost at 8 - 20 kHz, while the High Boost Grid offers a 10 dB soft boost around 12 kHz. These grids can be easily detached and cleaned. Acoustically similar to the 4060, this mic is sensitivity - adjusted for higher sound pressure levels, ideal when close to a sound source or recording high - intensity content. The 4661 Heavy Duty can handle 144 dB peak SPL before clipping, making it great for loud instruments like snare drums, guitars, bass, and speaker cabinets. The heavy - duty cable relief and thicker cable work well in rough live environments. Technical specs include an omnidirectional pattern, pressure operation principle, pre - polarized condenser cartridge, 20 Hz - 20 kHz frequency response, and more. It comes in black or beige, weighs 13 g (0.46 oz), and has a 1.8 m (5.9 ft) cable. It can operate from - 40C to 45C (- 40F to 113F) and up to 90% relative humidity.
Using the DPA 4661 CORE Heavy Duty Omnidirectional Microphone is straightforward. First, choose the right grid according to your sound needs. If you want a little boost at 8 - 20 kHz, use the Soft Boost Grid. For more boost around 12 kHz, go for the High Boost Grid. Connect the microphone to your audio system using the appropriate connector like the 3 - pin LEMO. When using it in live settings, the heavy - duty cable and cable relief will handle the rough environment well. Just make sure it's placed close to the sound source for the best results. As for maintenance, detach the grids regularly and wipe them clean of sweat, makeup, or dust. Keep the microphone in a dry place, as it can tolerate humidity but excessive moisture might still affect its performance. Avoid exposing it to extreme temperatures outside the - 40C to 45C (- 40F to 113F) range. Also, be careful when handling the cable to prevent any unnecessary twists or pulls that could damage the Kevlar - reinforced part.
