Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 22

The Lectrosonics ACOAXTX is a 36-inch coaxial antenna equipped with an SMA connector, specifically designed for Block 22. This compact yet powerful antenna is a great choice when you need a small remote antenna. With an overall length of about 36 inches, one end has an SMA connector, and the other end is cut to a 1/4 wavelength of the corresponding frequency block. It comes with a color band and tag to clearly indicate its block. It's highly useful in various scenarios. For instance, in a multichannel bag system, the gear bag may cause RF interference that weakens the performance of standard whip antennas. You can position this coaxial antenna on the bag strap to solve this problem. Also, when clothing or other gear might cover or affect equipment performance, you can place the antenna where it works best. Remember, for maximum effectiveness, the coaxial antenna should be positioned vertically, either pointing up or down. Each half of the antenna is cut to 1/4 wavelength of the corresponding block. When using it, keep the antenna section away from metal surfaces. The orientation of the rest of the cable doesn't affect the antenna's performance.

Using this Lectrosonics coaxial antenna is quite easy. First, make sure the antenna is properly connected to your equipment via the SMA connector. Then, find a suitable place to position it. If you're using it with a multichannel bag system, attach it to the bag strap. If clothing or other gear is a concern, place it where it won't be covered. Always ensure the antenna is in a vertical position, whether it's pointing up or down. This will give you the best results. As for maintenance, keep it clean and dry. Avoid bending the antenna too much, as it might affect its performance. When not in use, store it in a safe place away from metal objects. And always remember to keep the antenna section away from metal surfaces during use to maintain its effectiveness.