Azden EX-50H High Performance Omni-Directional Lapel Microphone

The Azden EX-50H lapel microphone is a top - notch addition to any Azden wireless system. It's crafted to boost the sound quality significantly. Compared to the standard lapel mic that comes with the system, the EX - 50H has a more sensitive microphone element. This results in a rich, nuanced, and full - bodied sound with a wider frequency response. It's hand - made in Japan and is an electret condenser microphone. The EX - 50H is an omni - directional lavalier mic and works seamlessly with 1201BT & 2000BT body - packs. It features a 4 - pin Hirose connector. Key features include its Japanese craftsmanship, high - performance omni - directionality, suitability for specific body - packs, and the unique connector. Technical specs: It's an electret condenser mic with a frequency response of 30 to 20,000 Hz, sensitivity of - 43 dB @ 1 kHz, impedance of 2.2 k ohm, SPL of 100 dB, S/N ratio > 50 dB, power requirement of 1 to 11 VDC, power consumption of 0.5 mA or less, and a 4 - pin Hirose connector.

Using the Azden EX - 50H is easy. First, connect it to your 1201BT or 2000BT body - pack using the 4 - pin Hirose connector. Clip it onto your clothing, close to the sound source. Turn on your wireless system and start recording or broadcasting. Remember to keep the microphone away from strong wind sources as it can cause unwanted noise. When not in use, store it in a dry and clean place. Avoid dropping or hitting it, as this could damage the sensitive microphone element. To clean it, use a soft, dry cloth. If you need to clean the connector, be very gentle. That's all you need to know to get the most out of your Azden EX - 50H microphone.