Product Detail
The Saramonic Blink 500 ProX TX Clip-On Transmitter paired with an SR-M1 Lavalier Microphone is a must - have for capturing top - notch audio anywhere. It works seamlessly with Blink 500 ProX RX, RXDi, and RXUC Receivers. This compact and user - friendly wireless transmitter can be easily clipped onto clothing for hands - free use. Whether you're into recording interviews, podcasts, or making presentations, it offers clear and crisp audio with minimal setup and high reliability. The high - performance lavalier microphone ensures excellent sound clarity, even in noisy environments. With ultra - low latency and a wide signal range, it's perfect for content creators in dynamic settings. Operating on the 2.4GHz spectrum, it provides optimal performance globally. Easy pairing, long battery life, and plug - and - play functionality make it suitable for both beginners and pros. Its portability doesn't compromise sound quality, and the lavalier connects directly to the transmitter for clear, deep voice capture, free from background noise. Ideal for vlogs, mobile filmmaking, online broadcasting, etc., when paired with the Blink 500 ProX RX receivers, it gives full control over audio setup with wireless convenience.
Key Features:
- Wireless clip - on transmitter with lavalier mic for Blink 500 ProX receivers
- Compatible with Blink 500 ProX RX, RXDi, and RXUC receivers
- Compact, portable, and easy to use
- 2.4GHz wireless frequency for interference - free sound
- High - quality lavalier mic for clear voice capture
- Plug - and - play setup
- Long battery life for extended recording
- Great for interviews, podcasts, mobile filmmaking, live streaming, etc.
- Ultra - low latency and reliable wireless signal
Technical Specifications:
- Dimensions: 3.5' x 1.6' x 0.7'
- Weight: 1.4 oz
- Operating Frequency: 2.4GHz
- Audio Input: 3.5mm TRS microphone input
- Transmitter Battery Life: 8 hours
- Battery Type: Rechargeable Lithium - ion battery
- Charging Port: USB - C
- Operating Range: 98 feet (30 meters)
- System Latency: 16ms
- Frequency Response: 20Hz – 20kHz
- Signal - to - Noise Ratio: 75dB
- Microphone Type: Lavalier Condenser Microphone
- Microphone Pickup Pattern: Omnidirectional
- Compatibility: Compatible with Blink 500 ProX RX, RXDi, and RXUC Receivers
TX Transmitter Specifications:
- Transmission Type: 2.4GHz Digital Frequency
- Modulation: Digital Modulation
- Antenna: Built - In FPC Antenna
- Operating Range (Without Obstacles): Up to 328' (100m)
- RF Output Power: <10mW
- Frequency Response: 20Hz to 20KHz
- Reference Audio Input Level: - 20~ - 42dBv (MIC input, 0dB Attenuation)
- Input Connector: 3.5mm Mic In / Line In (Mic with Plug - in - Power)
- Built - in Microphone Polar Pattern: Omnidirectional
- Built - in Microphone Maximum SPL: 106dB
- Built - in Microphone Sensitivity: 39±2dB (Tested at 2V 2.2KΩ)
- Lavalier Microphone Maximum SPL: 120dB
- Lavalier Microphone Sensitivity: 39+/-2dB (0dB = 1V/Pa, 1kHz)
- Digital Signal Resolution: 16bit / 48kHz
- Signal - to - Noise Ratio: ≥84dB
- Distortion: ≤0.1%
- High - contrast OLED Screen Resolution: 128 x 64 pixels
- Other Functions: Tactile Microphone Mute Function
- Power Requirements: Built - in Li - ion Battery, USB - C DC 5V or Charging Contact
- Battery Life: Approximately 10 - hours
- Battery Specifications: 3.7V / 400mAh
- Weight: 1.04oz (29.5g)
- Dimensions: 2.2 x 1.49 x 0.61” (56 × 38 × 15.5mm)
- Operating Temperatures: 0° to 122°F (0°C to 50°C)
- Storage Temperatures: - 50° to 122°F (–10°C to +50°C)
SR - M1 Lavalier Microphone Specifications:
- Acoustic Principle: Electret Condenser
- Polar Pattern: Omnidirectional
- Connector: 3.5mm
- Cable Length: 4.1’ (1.25m)
- Maximum SPL: 110dB
- Sensitivity: - 39dB+/-2dB(0dB = 1V/Pa, 1kHz)
- Signal - to - Noise Ratio: ≥60dB
- THD: <1% (94dB SPL at 1kHz)
- Power Requirements: Plug - in - Power (1V～10V)
- Standard Operating Voltage: 3V
- Current Consumption: <500μA
- Output Impedance: <2.2KΩ
Using your Saramonic Blink 500 ProX TX Transmitter is a breeze. First, make sure the transmitter is fully charged via the USB - C port. You can check the battery level on the high - contrast OLED screen. Pair it with your Blink 500 ProX RX, RXDi, or RXUC Receiver easily; just follow the pairing instructions on the receiver's display. Once paired, clip the transmitter onto your clothing and connect the SR - M1 Lavalier Microphone to the 3.5mm input. You're ready to start recording. For best results, place the lavalier microphone close to your mouth but not too close to avoid popping sounds. When using it, keep the transmitter and receiver within the operating range, which is about 98 feet (30 meters) under normal conditions and up to 328 feet (100 meters) without obstacles. Remember, the 2.4GHz frequency ensures clear and interference - free sound, but try to avoid using it near other strong 2.4GHz devices. As for maintenance, always store the transmitter and microphone in a dry place within the recommended temperature range of - 50° to 122°F (–10°C to +50°C). Clean the lavalier microphone gently with a soft, dry cloth. If you're not using the device for a long time, fully charge the battery and then store it. This will help maintain the battery's health and ensure your transmitter is ready for your next recording session.
