Product Detail
The MIPRO ACT-5802/ACT-58T2 is a top - notch wireless audio solution. It consists of a 1/2U dual - channel digital receiver and two bodypack transmitters, all operating in the ISM 5 GHz frequency band. The ACT - 5802 receiver comes in a sleek 1/2U metal chassis. Its panel features the signature MIPRO style and operating procedure. With a built - in high - efficiency antenna and a graphic OLED screen, it offers a wide, blind - spot - free view. The stable digital modulation circuitry keeps all frequencies within a single band. You can choose from 12 interference - free channels in Group A or 24 in Group B1 & B2. Each channel allows setting 64 IDs and 1 specific ID to prevent interference in the same space. Group A has less interference, while Group B is great for more channels or lower latency. The dual - tuner true diversity receiving ensures long - range reception and eliminates signal drop - outs, avoiding interference from 2.4 GHz products. The well - designed PCB in a sturdy chassis minimizes malfunctions. The ACT - 58T bodypack transmitters have a compact, sturdy plastic housing. An adjustable belt clip makes it easy to wear in different positions. The unique battery cover gives easy access to buttons, and a lock device prevents accidental operation. It has an antenna, mini XLR connector, mute button, and remote - control mute jack on top. The world - first ACT function provides quick and precise frequency sync to the receiver. The mini XLR connector can accept either a screw - lock or a TA4F quick - lock plug. The ACT - 5802 receiver has an EIA standard 1/2U metal black case, built - in antenna, and graphic OLED display. It operates in the 5,725 - 5,850 MHz frequency range. The sample rate is 24 - bit/48 kHz, with a frequency response of 18 Hz - 23 kHz in Group B and latency less than 1.7 ms in Group B. It has a 120 dBA dynamic range and output connectors include balanced XLR and unbalanced - 6.3 mm with adjustable output. It uses an external 100 - 240V AC switching power supply, measures 210 x 44 x 180 mm, and weighs about 0.8 kg. The ACT - 58T transmitter operates in the ISM 5.8 GHz frequency, with digital modulation and 20 mW RF output power (country - dependent). It supports various mic capsule modules. The max audio input is 6.5 dBV. The battery meter uses 3 LEDs to show battery status, and it automatically shuts down after 2 hours on low battery. It measures 63 x 82 x 22 mm, weighs about 73 g, and runs on 2 AA alkaline batteries.
Using the MIPRO ACT - 5802/ACT - 58T2 system is a breeze. First, connect the ACT - 5802 receiver to your audio equipment using the balanced XLR or unbalanced - 6.3 mm output connectors. Plug in the external 100 - 240V AC switching power supply to power up the receiver. For the ACT - 58T bodypack transmitters, insert 2 AA alkaline batteries into the battery compartment. Make sure to choose the right mic capsule module for your needs, like a lavalier or head - worn mic, and connect it to the mini XLR connector. Clip the transmitter to your clothing using the adjustable belt clip. When it comes to channel setup, you can use the ACT Sync feature. Select either Group A for less interference or Group B if you need more channels or lower latency. Remember, you can set 64 IDs and 1 specific ID for each channel to avoid interference in the same space. To mute the transmitter, you can use the mute button on the top or the remote - control mute jack. As for the battery, keep an eye on the 3 LED battery meter. When they turn red, you have about 2 hours of power left before the transmitter shuts down automatically. In terms of maintenance, keep the receiver and transmitters in a dry and clean place. Avoid exposing them to extreme temperatures or moisture. If the equipment gets dirty, use a soft, dry cloth to wipe it. Don't use harsh chemicals or abrasive materials as they can damage the devices. Also, check the batteries regularly and replace them when needed to ensure optimal performance.
