The Audio-Technica ATW-1101/H System 10 Wireless Headworn Microphone System is a top-notch digital wireless solution for musicians, presenters, and public speakers. It features advanced 24-bit operation for high-fidelity audio, quick setup, and a clear, natural sound. Operating in the 2.4 GHz range, it avoids TV and DTV interference, ensuring smooth performances.
Audio-Technica’s System 10 offers a reliable digital wireless option with Frequency, Time, and Space Diversity technologies. These technologies dynamically allocate frequencies, send signals through multiple time slots, and use dual antennas on both the transmitter and receiver to ensure interference-free operation and optimal signal integrity.
Ideal for live shows, lectures, and other professional audio needs, System 10 comes in various configurations, including handheld vocal mics and UniPak transmitters compatible with different types of microphones and electric guitars. The ATW-R1100 receiver has a digital display for easy setup and essential features like volume control and peak indicators.
**Key Features**
- Super easy to operate with instant channel selection, sync, and setup
- State-of-the-art digital receiver for reliable performance
- Balanced XLR and unbalanced 1/4 output jacks with level control
- Digital 24-bit/48 kHz wireless operation for great sound quality and performance
- 2.4 GHz range free from TV interference
- Three levels of diversity assurance: frequency, time, and space
- Automatic frequency selection for interference-free operation
**Specifications**
- Operating Frequencies: 2.4 GHz ISM band
- Dynamic Range: >109 dB (A-weighted), typical
- Total Harmonic Distortion: <0.05% typical
- Operating Range: 30m (100') typical
- Operating Temperature Range: 0°C to +40°C (32°F to 104°F)
- Frequency Response: 20 Hz to 20 kHz
- Audio Sampling: 24 bit / 48 kHz
- Receiver - Receiving System: Diversity (frequency/time/space)
- Receiver - Maximum Output Level: XLR, balanced: 0 dBV; 1/4' (6.3 mm), unbalanced: +6 dBV
- Receiver - Power Supply: 100-240V AC (50/60 Hz) to 12V DC 0.5A (center positive) switched mode external power supply
- Unipak Transmitter - RF Output Power: 10 mW
- Unipak Transmitter - Spurious Emissions: Following federal and national regulations
- Unipak Transmitter - Input Connection: 1x 4-pin locking connector
- Unipak Transmitter - Batteries: Two 1.5V AA
- Unipak Transmitter - Battery Life: >7 hours (alkaline)
- Microphone - Element: Dynamic
- Microphone - Polar Pattern: Hypercardioid
- Microphone - Frequency Response: 200 Hz - 18 kHz
- Microphone - Open Circuit Sensitivity: -55 dB (1.7 mV) re 1V at 1 Pa
- Microphone - Impedance: 600 ohms
- Microphone - Connector: Locking 4-Pin HRS connector
- Microphone - Cable Length: 55' (1.4 m)
- Microphone - Headset nominal: 4.72' / 11.98cm
- Microphone - Flexible boom: 3.17' / 8.05cm
- Microphone - Diameter: 0.80' / 2.03cm
- Dimensions (W x H x D): Receiver: 7.48 x 1.82 x 5.06' / 18.99 x 4.62 x 12.85cm; Unipak Transmitter: 2.76 x 4.21 x 0.98' / 7.01 x 10.69 x 2.48cm
- Weight: Receiver: 290 g (10.22 oz); Unipak Transmitter: 100 g (3.52 oz); Microphone: 2.1 oz (59.53 g)
**Package Contents**
- Audio-Technica ATW-T1001 System 10 Digital UniPak Transmitter
- ATW-R1100 System 10 Digital Wireless Receiver
- PRO 8HEcW Headworn Hypercardioid Dynamic Mic
- Large Foam Windscreen for Headworn Microphone
- Small Foam Windscreen for Headworn Microphone
- AT8439 Clothing Clip
- Power Supply
- Audio-Technica Warranty
Using this Audio-Technica wireless headworn microphone system is a breeze. First, make sure the batteries in the Unipak transmitter are properly installed. You can use two 1.5V AA batteries, which should last for over 7 hours if they're alkaline.
Next, connect the receiver to a power source using the provided power supply. The power supply can handle 100 - 240V AC at 50/60 Hz and converts it to 12V DC 0.5A.
To set up the system, turn on both the transmitter and the receiver. Use the digital display on the receiver for easy navigation and configuration. You can quickly select channels, sync the devices, and adjust the volume.
When using the microphone, adjust the headset to fit your head comfortably. The microphone has a flexible boom, so you can position it for the best sound pickup. The hypercardioid polar pattern helps focus on the sound in front of the mic and reduces background noise.
For outdoor use, you can attach the foam windscreen to the microphone to reduce wind noise. You have both a large and a small foam windscreen in the package.
Some things to keep in mind: Avoid operating the system in extreme temperatures. The operating temperature range is from 0°C to +40°C (32°F to 104°F). Also, keep the system away from strong sources of interference, like other wireless devices operating in the same frequency range.
For maintenance, keep the system clean. You can use a soft, dry cloth to wipe the microphone, transmitter, and receiver. If the battery life starts to decline, replace the batteries. And make sure to store the system in a dry, safe place when not in use.
