Product Detail
The Saramonic Blink Me B2 is a game - changing two - person smart wireless microphone system. Ideal for content creators, filmmakers, and vloggers, it offers a revolutionary way to capture top - notch audio. This system is packed with cutting - edge technology, combining convenience, versatility, and advanced features in an easy - to - operate setup. It comes with two customizable transmitters, a receiver with a user - friendly 1.3 - inch touchscreen interface, and built - in recording functions to ensure crystal - clear sound in any environment. The touchscreen receiver allows for effortless setup and operation. You can easily adjust gain control, mute, and monitoring levels. It works seamlessly with DSLR cameras and mobile devices, providing the flexibility and high - quality audio that modern creators need. The customizable transmitters let you tailor each mic for your specific recording requirements. They offer multiple gain levels, a choice between omni - directional and unidirectional polar patterns, and the option to record audio directly on the transmitter. This gives you the freedom to choose between wireless transmission and direct recording for extra audio security. Whether you're in a crowded place capturing dialogue or filming an interview, the Saramonic Blink Me B2 ensures high - quality, interference - free sound. Its advanced wireless technology provides reliable long - range transmission, perfect for on - the - go creators. With built - in recording, you can be confident that no audio is lost, even if the wireless connection drops. Key Features: 2 - Person Wireless System with Customizable Transmitters; 1.3 - inch Touchscreen Receiver for Easy Setup and Control; Omnidirectional and Unidirectional Polar Pattern Options; Built - in Recording on Transmitters for Backup Audio; Compatible with DSLR Cameras, Smartphones, and Mobile Devices; Adjustable Gain, Mute, and Monitoring Settings; Reliable Wireless Transmission with Long - Range Capabilities; Perfect for Filmmakers, Vloggers, and Content Creators. Technical Specifications: Dimensions (Receiver): 2.23' x 2.23' x 0.99'; Dimensions (Transmitter): 1.85' x 0.49'; Weight (Receiver): 2.47 oz; Weight (Transmitter): 1.06 oz; Battery Life (Receiver): Approximately 24 hours (with full charge for 1x transmitter); Battery Life (Transmitter): Approximately 6 hours (Recording Enabled) / 8 hours (Recording Disabled); Wireless Range: 328' (100 meters) Line - of - Sight; RF Output Power: < 10mW; Frequency Response: 20Hz to 10kHz; Signal - to - Noise Ratio: > 80dB; Maximum SPL: 110dB; Sensitivity: - 39±2dB; Microphone Polar Pattern: Omnidirectional; Transmission Type: 2.4GHz Digital Frequency; Modulation: Digital Modulation; Transmitter Audio Input: Built - In Condenser Microphone; Receiver Analog Audio Output: Female 3.5mm Auto - Sensing Output (TRS/TRRS); Receiver Analog Digital Output: USB - C Female; Receiver Headphone Output: Female 3.5mm TRS; Power Requirements: Built - In Rechargeable Li - Ion Battery or USB - C DC 5V (Receiver Only); Battery Specification: Transmitter: 3.85V/495mAh / Receiver: 3.7V/1600mAh; Charging Connector: Transmitter: Charging Contacts / Receiver: USB - C; Receiver Charging Time: Approximately 2.5 hours (using 5V/2A charger); Transmitters Memory: 8GB; Transmitters Record Time: 16 - bit/48kHz: 22 hours / 24 - bit/48kHz: 15 hours; Operating Temperature: 0°C to + 50°C; Storage Temperature: - 10°C to + 50°C; Transmitter Display: 1.3” TFT (Thin - Film - Transistor LED) with Panda Glass and AF Coating; Receiver Display: 0.96” TFT (Thin - Film - Transistor LED) with Panda Glass and AF Coating; Antenna: Built - in. What's Included: 2 x Customizable Touch Screen Transmitter (TX); 1 x Touch Screen Receiver (RX); 1 x Magnetic Shoe - Mount Adapter with ¼ - 20 Thread; 2 x Magnetic Transmitter Clip; 4 x Magnetic Mounts; 2 x Screw - On Furry Windshield for Transmitters; 1 x MVC Adjustable Phone Holder with Cold Shoe Mount and ¼ - 20 Tripod Mount; 1 x TRRS to TRRS Audio Output Cable; 2 x Screen Protector for Transmitters; 1 x Screen Protector for Receiver; 1 x Clamshell Padded Carry Case.
Using the Saramonic Blink Me B2 wireless microphone system is a breeze. First, charge the receiver and transmitters fully before your first use. The receiver can be charged via USB - C, and the transmitters have charging contacts. When you're ready to record, turn on the receiver and the transmitters. You can use the 1.3 - inch touchscreen on the receiver to easily set up the system. Adjust gain control, mute, and monitoring levels as you like. For the transmitters, you can customize them according to your recording needs. You can choose different gain levels and polar patterns. If you're in a noisy environment, you might want to use the unidirectional pattern to focus on the sound source. The transmitters also have the option to record audio directly, which is great for backup. When connecting to your device, you can use the appropriate cables. For DSLR cameras and mobile devices, there are different output options on the receiver. Just make sure to match the right cable to your device. As for maintenance, keep the system clean. Wipe the screens of the receiver and transmitters gently with a soft cloth. Don't expose the system to extreme temperatures. The operating temperature is between 0°C and + 50°C, and the storage temperature is between - 10°C and + 50°C. If you're not using the system for a long time, store it in the provided clamshell padded carry case to protect it from dust and damage.
