Audio-Technica ATW-3212NC710 EE1 3000 Series Network Wireless Handheld System with ATW-C710, EE1 530-590 MHz

The Audio-Technica ATW-3212NC710 EE1 is an advanced 3000 Series wireless handheld system designed for professional audio needs. It features a cutting - edge 60 MHz tuning range, outperforming previous models. With multiple frequency bands like DE2, EE1, EF1, FG1, GH2, and HH2, it offers great flexibility in different regions and settings. This system includes an ATW - R3210 receiver, ATW - T3202 handheld transmitter, and an ATW - C710 interchangeable condenser cardioid capsule. It's ideal for live shows, speeches, and broadcasts. The ATW - T3202 transmitter has a sturdy metal housing and runs on two AA batteries. It has an industry - standard thread for easy microphone capsule swapping, including the provided ATW - C710. A multifunction button allows for quick backup frequency switching in case of interference. The IR sync and frequency scanning make setup super easy. The transmitter's charging terminals work with Audio - Technica's smart charging docks (sold separately). The ATW - 3212NC710 EE1 system ensures top - notch performance with balanced and unbalanced audio output jacks, antenna power for RF devices, and a ground - lift switch to remove hum. Whether you're a sound engineer or a performer, it combines innovation and ease of use for high - quality sound. **Key Features** - 60 MHz UHF tuning bandwidth in 6 frequency bands - Multifunction button for fast frequency backup - IR sync and frequency scanning - Industry - standard thread for interchangeable capsules - Charging terminals for NiMH batteries - ATW - C710 condenser interchangeable cardioid capsule **Specifications** - Microphone Element: Fixed - charge back plate permanently polarized condenser - Polar Pattern: Cardioid - Frequency Response: 80 – 20000 Hz - Impedance: 60 Ohms - Power Requirements: 5 V DC - Battery Type: Two 1.5V AA (not included) - Weight: 114 g - Dimensions: 84.4 mm long, 50 mm max. diameter - Output Connector: Interchangeable industry - standard thread - Operating Frequencies: DE2 (470 - 530 MHz), EE1 (530 - 590 MHz), EF1 (590 - 650 MHz), FG1 (650 - 700 MHz), GH2 (795 - 806 MHz), HH2 (821 - 865 MHz) - Minimum Frequency Step: 25 kHz - Modulation Mode: FM - Maximum Deviation: ATW - T3201: ±38 kHz (THD:10%), ATW - T3202: ±36 kHz (THD:10%) - Simultaneous Use: 40 Channels per band - Frequency Response: ATW - T3201: 31 Hz to 15500 Hz, ATW - T3202: 25 Hz to 16700 Hz - Operating Range: 100 m - Dynamic Range: ATW - T3201 Mic input: > 115 dB (A - weighted), typical; ATW - T3201 Inst input: > 112 dB (A - weighted), typical; ATW - T3202: > 115 dB (A - weighted), typical - Total Harmonic Distortion: <1.0% (at 1 kHz ±17.5 kHz deviation) - Operating Temperature Range: - 5 ºC to +45 ºC - Receiver: True Diversity Receiving System - Sensitivity: 20 dBuV at 60 dBA S/N ratio (50 Ω termination) - Maximum Output Level: XLR / Balanced: +14 dBV, 6.3 mm (¼') / Unbalanced: +8 dBV - Antenna Input: BNC - type, 50 Ω - Power Output: 12 V DC, 160 mA (combined) - Power Supply: 100 - 240V AC (50/60 Hz) to 12V DC 1A switched mode external power supply - Receiver Dimensions: 210.0 mm x 191.0 mm x 43.4 mm (W x H x D) - Receiver Weight: 1100 g (without accessories) - Handheld Transmitter RF Power Output: High: 30 mW, Low: 10 mW (switchable), at 50 Ω - Spurious Emissions: Following federal and national regulations - Battery Life (Alkaline): High: 8.0 hours / Low: 9.0 hours - Battery Life (Ni - MH 1900mAh): High: 9.0 hours / Low: 9.5 hours - Handheld Transmitter Dimensions: 193.0 mm long, 37.0 mm maximum diameter - Net Weight: 200 g **Package Contents** - Two Flexible UHF antennas - AC Adapter (country dependent) - Rack Mount Adaptors - AT8456a Quiet - Flex stand clamp - 5/8' - 27 male to 3/8' - 16 female threaded screw adapter

Using this Audio - Technica wireless system is a breeze. First, insert two AA batteries into the ATW - T3202 handheld transmitter. Make sure the batteries are inserted correctly. Then, connect the antennas to the receiver. You can use the frequency scanning feature to find the best available frequency. If you encounter interference during use, just press the multifunction button on the transmitter to switch to a backup frequency. For setting up the system, use the IR sync functionality to quickly pair the transmitter and receiver. When it comes to output, you can connect the system to your audio equipment using the balanced or unbalanced audio output jacks. As for maintenance, keep the system clean. Wipe the transmitter and receiver with a soft, dry cloth. Avoid exposing the system to extreme temperatures. The operating temperature range is between - 5 ºC and +45 ºC. Also, when not in use, store the system in a dry place. You can charge the NiMH batteries using the charging terminals on the transmitter with Audio - Technica's smart charging docks (sold separately). Remember to follow all federal and national regulations regarding spurious emissions.