Product Detail
The Point Source Audio CO-8WS-XTX-BE SERIES8 is a high - quality omnidirectional earworn microphone in a stylish beige color, designed specifically for Telex systems. This single over - ear microphone features a super - flexible boom that can be worn on either the left or right ear. The mic element is IP 57 rated, which means it's well - protected against water, sweat, and makeup. The package includes a microphone, a cable clip, and a standard - size windscreen. Key features include an unbreakable boom that can bend 360 degrees, the option to convert it to a dual - ear setup with the optional R - DMC accessory, and compatibility with up to 136 dB max SPL. It comes in colors like beige, brown, or black, has a 1 - meter cable length, and uses interchangeable X - Connectors that work with all popular wireless systems such as Shure, Sennheiser, and Audio - Technica. Technical details show it has a back electret condenser element, omnidirectional pattern, frequency range from 20Hz to 20kHz, - 43dB 1V/Pa sensitivity (+/- 3dB at 1kHz), 136dB SPL maximum SPL, 1400 Ohm output impedance (at 1kHz), 1 - 10 V operating voltage, a cable length of 4 ft. 077 in + connector, and a net weight of 0.6 oz.
Using your Point Source Audio CO - 8WS SERIES8 earworn microphone is easy. First, decide whether you want to wear it on the left or right ear. Adjust the super - flexible boom to the right position for the best sound capture. You can also use the optional R - DMC accessory to convert it to a dual - ear setup if you prefer. When it comes to connecting, use the interchangeable X - Connectors to link it with popular wireless systems like Shure, Sennheiser, or Audio - Technica. Since the mic element is IP 57 rated, it can handle water, sweat, and makeup. But try to avoid submerging it for a long time. After each use, wipe it gently with a soft cloth to keep it clean. Store it in a dry place when not in use, and make sure the cable is not bent or twisted too much to prevent damage. Also, check the operating voltage (it should be between 1 - 10 V) before using it to ensure proper function.
