Product Detail
The Clear - Com CZ - BS410 BS410 is a top - notch base station for the DX410 wireless system. It supports up to 15 registered BP410 beltpacks and/or WH410 all - in - one wireless headsets. Operating in the 2.4GHz frequency band, it offers high - quality 7kHz wideband audio. The BS410 allows audio bridging, combining 2 - wire and 4 - wire audio on A or B channels. Key features include two - channel operation, 7kHz wideband audio, 2 - wire and 4 - wire bridging, 2 - wire auto - nulling, lost packet concealment, an upgraded radio, and support for up to 15 beltpacks or wireless headsets. Technical specs show it has 2 audio channels, can handle up to 15 BP410 and/or WH410 per base station. It has full - duplex capabilities, operates in the 2400 - 2483.5 MHz radio frequency range, and has an audio frequency of 200 Hz - 7kHz. With various I/O options, a 4 - pin mini - DIN headset connector, and good communication security, it's a reliable choice. It requires 100 - 240 VAC, 50 - 60 Hz or 12 - 14 VDC, works in temperatures from 0C - +50C, and has dimensions of 44 x 483 x 435 mm (HxWxD) and weighs 4.1 kg.
Using the Clear - Com CZ - BS410 BS410 base station is quite straightforward. First, make sure to connect it to a power source. You can use either 100 - 240 VAC at 50 - 60 Hz or 12 - 14 VDC. Then, connect your beltpacks or wireless headsets to the base station. It can support up to 15 of them. When it comes to audio connections, you have 2 - wire and 4 - wire options. You can combine them on A or B channels for audio bridging. For the best performance, keep the base station in an environment where the temperature is between 0C and +50C. Avoid exposing it to extreme heat or cold. When it comes to maintenance, keep it clean from dust and debris. If you notice any issues with the audio quality, check the connections first. The base station is designed to be reliable, but if you have any serious problems, contact the manufacturer for support.
