Pre - owned Azden PRO - XD 2.4GHz Digital Wireless Lavalier Microphone System
Like New: An open - box item that shows no signs of use.
The Azden i - Coustics PRO - XD is a user - friendly and budget - friendly digital wireless lavalier microphone system. It's perfect for camera mounting and mobile video work. Its small and light design makes it a great choice for capturing audio on the move. Whether you're into video production, electronic news gathering, or using mobile devices, this system has you covered. It comes with an adapter cable that works with the headset inputs of most modern smartphones and tablets!
Key Features:
- Works in the 2.4 GHz wireless range
- High - gain output reduces noise and hiss from low - quality camera preamps
- Compatible with mobile devices
- Transmitter and receiver auto - sync
- Can reach up to 35 meters or more in ideal conditions
- Has rechargeable internal batteries
- Wide frequency response and low internal noise
- Comes with a headphone monitor output
- Has a line - in aux input
Technical Specifications:
PRO - XD
Operating Freq.
2.4GHz ISM Band
Dynamic Range
90dB
Signal - To - Noise
80dB
Operating Range
35m typical; up to 120m in ideal conditions.
Freq. Response
20Hz - 20kHz, - 1dB
Digital Sampling
48kHz/16bit
System Latency
14ms
Battery Life Span
300 cycles
Battery Type
Lithium - ion
Power Supply
USB 5V
Warranty
2 Years (Registration Required)
Accessories
Shoe mount, belt clip, lapel clip, trrs adapter, USB mini to USB - A cable, AC adapter.
TRANSMITTER (PRO - XDT)
RF Output Power
10mW
Mic Input
3.5mm mono TRRS
Aux Input
3.5mm stereo, line level
Input Impedance
Mic: 2.2k; Aux: 10k
Max Input
300mV RMS
Battery Life
11 hours
Battery Charge Time
3 hours 30 min
Dimensions
48x79x14mm (W/H/D)
Weight
62g
RECEIVER (PRO - XDR)
RF Output Power
10mW
Max Output Level
- 14dBV
Mic Output
3.5mm dual - mono/stereo
Headphone Output
3.5mm stereo
Output Impedance
Mic: 600; Headphone: 16
Battery Life
16 hours
Battery Charge Time
3 hours
Dimensions
48x79x14mm (W/H/D)
Weight
68g
MICROPHONE (EX - 503XD)
Mic Element
Electret Condenser
Polar Pattern
Omni - Directional
Freq. Response
30Hz - 20kHz
Sensitivity
- 46dB at 1kHz (0dB = 1V/Pa)
Impedance
2.2k (at 1kHz)
Power Requirement
Plug - in power DC 1 - 10V
Connector Type
3.5mm TRRS
Cord Length
105cm
Using the Azden PRO - XD wireless microphone system is a breeze. First, make sure both the transmitter and receiver are fully charged. You can charge them using the provided USB cable and a 5V power source. Once charged, turn on both the transmitter and receiver, and they'll automatically sync. For camera mounting, use the shoe mount accessory. If you're using it with a mobile device, connect it via the trrs adapter. When using the microphone, clip it to your lapel or use the belt clip. For monitoring, you can plug in your headphones to the headphone output. As for maintenance, keep the system away from extreme heat and moisture. After each use, turn off the devices and store them in a safe place. If the batteries aren't holding a charge well after 300 cycles, you may need to replace them. And don't forget to register your product to get the 2 - year warranty.
