Product Detail
The first time you use VocoPro's new Sing & Hear wireless in-ear monitor, you'll likely exclaim 'wow!' Now you can finally hear your voice in detail. This innovative system combines a wireless microphone, a wireless plug-in mic receiver, and a wireless in-ear receiver into one easy-to-use and affordable setup. The wireless microphone sends signals directly to the wireless in-ear receiver and the wireless mic receiver for the sound system at the same time. No need for an additional in-ear monitor transmitter or a mixing board. You'll hear your voice like never before, whether you're on stage or practicing. With the tap-and-sync function, you can synchronize it with other commander receivers within the RF range, like the wireless USB receiver for recording on PC, MAC, or iPhone* easily. There are four different frequency groups, allowing up to four transmitters to work with unlimited receivers. Each transmitter has 20 PLL frequencies that can be switched quickly to avoid interference, all working together without any setup or re-syncing. Key Features: Built-in rechargeable battery with 6 hours of run time per charge (3.7v Li-ion 650 mAh). You can extend the run-time using a Mini 5V USB charging port or a power bank (not included). The Tap-and-Sync (tm) feature lets you change the frequency and reconnect automatically with just a tap. It operates on digital UHF at 900 MHz, away from TV, radio, and Wi-Fi interference. *Requires lightning to USB camera adapter (Not included).
Using the VocoPro SingandHear-Solo is a breeze. First, make sure the built - in rechargeable battery is charged. It can run for 6 hours on a single charge, but you can also use a Mini 5V USB charging port or a power bank to extend its run - time. To start, turn on the wireless microphone. It will send signals directly to the wireless in - ear receiver and the wireless mic receiver for the sound system. If you want to synchronize it with other receivers like the wireless USB receiver for recording on your PC, MAC, or iPhone, use the tap - and - sync function. Remember, if you're using an iPhone, you'll need a lightning to USB camera adapter. When it comes to frequency, there are four different groups. Each transmitter has 20 PLL frequencies that you can switch on the fly to avoid interference. For maintenance, keep the device clean and store it in a dry place. Don't expose it to extreme temperatures or humidity. If you're not using it for a long time, fully charge the battery before storing it.
