Product Detail
The Tascam TM-95GN Desktop Condenser Gooseneck Microphone is a game-changer for audio recording. It features two goosenecks between the mic and its stand, allowing you to freely move and position the mic as needed. You can easily set it up for a specific speaker without an extra mic stand. The sound is output through the XLR connector on the back of the stand, and it comes with its own XLR microphone cable, so it's ready to use right out of the box. Connect it to sound equipment like MiNiSTUDIO series models. Unlike typical industry gooseneck mics, the TM-95GN comes with a dedicated, incredibly stable stand that has its own ON/OFF switch. You can power the mic on and off directly from the stand, preventing unnecessary noise when no one is talking. Key features include a back-electret condenser microphone, cardioid (unidirectional) pattern, 48V phantom power supply, a windscreen, a custom table stand with a switch, and a 7.8 ft. (2.4 m) XLR-XLR microphone patch cable. Technical specs: directivity is cardioid (unidirectional), frequency response is 50Hz to 16,000Hz, output impedance is 250OHMS -30%, load impedance is 100OHMS, sensitivity is -39dB -3dB (0dB=1V/Pa at 1kHz), connector is a 3-pin XLR male, phantom power is 48V, dimensions are 5.1' x 5.5' x 18' (132.5 x 140 x 457.5 mm), weight is 2.1 lbs. (970 g), and accessories include a windscreen and the XLR-XLR patch cable.
Using the Tascam TM-95GN is a breeze. First, take it out of the box and connect the included XLR cable to the XLR connector on the back of the stand. Then, connect the other end of the cable to your sound equipment, like a MiNiSTUDIO model. Adjust the goosenecks to position the mic where you need it for the best sound. You can easily turn the mic on and off using the switch on the stand. When no one is speaking, switch it off to avoid recording unwanted noise. As for maintenance, keep the microphone and stand clean. Wipe them gently with a soft, dry cloth. Avoid getting the mic wet or exposing it to extreme temperatures. If you need to clean the windscreen, remove it and follow the cleaning instructions provided. Make sure to always use a 48V phantom power supply as specified in the technical details. With proper use and care, your Tascam TM-95GN will provide great audio for a long time.
