Product Detail
The Sony URX - S03D/14 UWP - D is a top - notch two - channel portable wireless receiver. It directly fits into the slot of Sony XDCAM and HDCAM camcorders. Paired with the UTX - B03HR belt - pack transmitter, it offers easy channel setting, stable RF transmission, and high - quality sound via Digital Audio Processing. This receiver is not only highly usable with Sony XDCAM and HDCAM camcorders but also works smoothly with Sony 800 and UWP Series transmitters. Key features include a stable reception system, high - quality audio processing, direct digital connection to camcorders, automatic channel setting, compatibility with other Sony series, fast channel scanning, and wide frequency coverage. Technical specifications cover oscillator type, reception type, antenna type, carrier frequencies for different regions, frequency response, signal - to - noise ratio, distortion, audio delay, analog output, pilot tone signal, display, power requirements, operating and storage temperatures, dimensions, and mass.
Using the Sony URX - S03D/14 UWP - D receiver is a breeze. First, make sure to insert it properly into the slot of your Sony XDCAM or HDCAM camcorder. Connect it with the UTX - B03HR belt - pack transmitter or other compatible Sony 800 and UWP Series transmitters. You can use the automatic channel setting mode to quickly find the best channel. When it comes to frequency, check the carrier frequencies for your region and set it accordingly. For power, use a DC 7.0 V power supply. Keep in mind that the operating temperature should be between 0°C to 50°C (32°F to 122°F). Don't store or transport it in temperatures below - 20°C (- 4°F) or above 55°C (131°F). To maintain it, keep the receiver clean and dry. If the antenna gets dirty, you can gently clean it with a soft cloth. Also, be careful when handling the detachable antenna to avoid damage. And that's all you need to know to use and take care of this great receiver.
