Product Detail
The Shure RPW112 is a top - notch wireless SM58 cartridge housing assembly with a matte grill. It serves as an excellent replacement microphone head assembly for hand - held wireless transmitters. This cartridge offers a seamless fit and high - quality performance for your Shure handheld transmitters. To replace the cartridge assembly, follow these easy steps: First, use the provided .035 in. (0.9 mm) hexagonal - head wrench to loosen the setscrew in the microphone - transmitter handle. Note that T2, LX2, SC2, U2, ULX2, SLX2, UC2, UT2, PGX2 and UR2 microphone - transmitters don't have a setscrew. Then, hold the microphone - transmitter with the grille facing up, unscrew the grille and cartridge counterclockwise, and remove them. Thanks to the wiper contact design, no further disconnection is needed. Next, screw the replacement cartridge onto the handle and tighten it. Finally, if you're using an L Series or EC Series transmitter, tighten the setscrew on the transmitter.
Using the Shure RPW112 SM58 Cartridge is straightforward. First, check your transmitter model. If it's not a T2, LX2, SC2, U2, ULX2, SLX2, UC2, UT2, PGX2 or UR2, use the supplied wrench to loosen the setscrew. Keep the transmitter steady with the grille facing up and turn the grille and cartridge counterclockwise to remove them. Then, screw the new cartridge onto the handle tightly. For L or EC Series transmitters, don't forget to tighten the setscrew. As for maintenance, keep the cartridge clean from dust and debris. Store it in a dry place when not in use. Avoid dropping or subjecting it to strong impacts as this can damage the internal components. With proper use and care, your Shure RPW112 cartridge will provide long - lasting performance.
