The Sennheiser XSW - D Portable ENG Set is a top - notch wireless audio solution crafted specifically for DSLR cameras. With its one - touch operation, it's incredibly easy to use, and the superior digital transmission technology guarantees seamless audio connection. Whether you're a pro videographer or a passionate hobbyist, getting high - quality dialogue is a breeze. This set comes with both XLR and 3.5 mm (1/8') transmitters, offering versatile choices for different audio sources and recording settings. Built tough with a reliable connection, it sets a new standard for wireless audio in DSLR camera setups. Operating on a 2.4 GHz digital transmission frequency, it can be used worldwide and has an amazing range of up to 75 meters (250 feet) under ideal conditions. A single charge gives you up to 5 hours of battery life, perfect for all - day shoots. You can switch between multiple transmitters connected to one receiver, making it highly adaptable. And you can mute from either the transmitter or receiver for added convenience. This flexible wireless set allows you to mix and match connector types, ensuring compatibility with a wide variety of devices. The package includes essential accessories like a ME 2 - II clip - on lavalier mic, coiled cable, and cold shoe mount, providing a complete solution for any recording task, whether it's a documentary, interview, or live event. Key Features: One - touch ease - of - use, 2.4 GHz digital transmission for global use, 75 m range (250 ft) in optimal conditions, up to 5 hours battery life on a single charge, switch between multiple transmitters linked to one receiver, mix and match connector types, mute from either transmitter or receiver. Specifications: USB C interface for charging, input voltage typ. 5.0 V, charging temperature 0 °C - 60 °C (32 °F - 140 °F), charging time typ. 3 h, Li - Ion battery pack, nominal voltage 3.7 V, cell capacity 850 mAh, operating time up to 5 h, aptX Live Audio codec, audio frequency response 3.5 mm Jack/XLR 80 - 18,000 Hz, 6.3 mm Jack 10 - 18,000 Hz, max. audio output 12 dBu, signal - to - noise ratio 106 dB, THD less than 0.1%, audio latency less than 4 ms, dimensions vary by model (approx. 86 x 24 x 28 mm to 130 x 82 x 51 mm), frequency range 2,400 - 2,483.5 MHz, transmission power (EIRP) max. 10 mW, modulation GFSK with TDMA, operating temperature - 10 °C to +55 °C (14 °F to 131 °F), relative humidity 95% (non - condensing). Package Contents: XSW - D 3.5 mm (1/8') transmitter, XSW - D female XLR transmitter, XSW - D 3.5 mm (1/8') receiver, ME 2 - II clip - on lavalier mic, 3.5 mm (1/8') coiled cable, cold Shoe mount, belt clip, USB - A to USB - C charging cable, colored stickers for labelling, quick guide, safety guide.
Using the Sennheiser XSW - D Portable ENG Set is super easy. First, charge the device using the USB - A to USB - C charging cable. Make sure to charge it in a temperature between 0 °C and 60 °C (32 °F - 140 °F). It usually takes about 3 hours to fully charge. Once charged, you can start using it. If you want to record audio, choose the appropriate transmitter (either the 3.5 mm or XLR one) according to your audio source. Connect the ME 2 - II clip - on lavalier mic if you need to capture close - up sound. Mount the receiver on your DSLR camera using the cold shoe mount. With just one touch, you can start the operation. The set can work within a range of up to 75 meters (250 feet) under good conditions, but try to keep it closer for a more stable connection. You can switch between multiple transmitters connected to the receiver to suit different recording needs. And if you need to mute the audio, you can do it from either the transmitter or the receiver. When it comes to maintenance, keep the device clean and dry. Avoid exposing it to extreme temperatures. The operating temperature should be between - 10 °C and +55 °C (14 °F to 131 °F). If the battery life gets shorter over time, it might be time to replace the Li - Ion battery pack. That's all you need to know to get the most out of your Sennheiser XSW - D Portable ENG Set.
