Product Detail
The Saramonic Blink 500 ProX TXR is a top - notch wireless audio solution for content creators, podcasters, videographers, and broadcasters. It's part of the Blink 500 ProX wireless mic system, offering flexibility and ease of use. With its sleek and compact design, it captures professional - grade audio for various uses like interviews, vlogging, filmmaking, and live streaming.
The built - in onboard recording feature lets you record audio directly on the transmitter. This is a lifesaver in case of wireless interference or connectivity issues, especially during outdoor shoots or travels. The included omnidirectional lavalier microphone ensures high - quality, hands - free audio, so you can focus on your content without worrying about equipment. It's also compatible with Saramonic’s RX, RXDi, and RXUC receivers.
Thanks to the 2.4GHz wireless tech, it provides reliable, interference - free audio transmission up to 328 feet. It's suitable for both indoor and outdoor use, with multiple channels for added convenience. Whether you're recording interviews or podcasts, it offers great sound clarity and is easy to set up.
**Key Features**:
- On - Board Recording: Backup your audio or record when wireless is unreliable.
- Built - In Lavalier Mic: Get crystal - clear audio capture.
- Compatible with ProX Receivers: Seamless integration for flexible setup.
- 2.4GHz Wireless: Robust transmission with a long range.
- Compact and Lightweight: Perfect for on - the - go creators.
- Low - Latency Audio: Real - time monitoring for live recordings.
**Technical Specifications**:
- Dimensions: 2.2' x 1.49' x 0.61' (56 x 38 x 15.5mm)
- Weight: 1.04 oz (29.5g)
- Transmission Type: 2.4GHz Digital Frequency
- Modulation: Digital Modulation
- Antenna: Built - In FPC Antenna
- Operating Range (Without Obstacles): Up to 328' (100m)
- RF Output Power: <10mW
- Frequency Response: 20Hz to 20kHz
- Recording Resolution: 24 - bit / 48kHz
- Recording Memory Capacity: 8GB (Approx. 14 hours & 50 minutes)
- Reference Audio Input Level: - 20~ - 42dBv (Mic input, 0dB Attenuation)
- Input Connector: 3.5mm Mic In / Line In (Mic with Plug - in - Power)
- Built - in Microphone Polar Pattern: Omnidirectional
- Built - in Microphone Maximum SPL: 106dB
- Built - in Microphone Sensitivity: 39±2dB (Tested at 2V 2.2KΩ)
- Lavalier Microphone Maximum SPL: 120dB
- Lavalier Microphone Sensitivity: 39±2dB (0dB = 1V/Pa, 1kHz)
- Digital Signal Resolution: 16bit / 48kHz
- Signal - to - Noise Ratio: ≥84dB
- Distortion: ≤0.1%
- Other Functions: Tactile Microphone Mute Function
- Power Requirements: Built - in Li - ion Battery, USB - C DC 5V or Charging Contact
- Battery Life Recording On: Approx. 8.5 hours
- Battery Life Recording Off: Approx. 11 hours
- Battery Specifications: 3.7V / 400mAh
- Operating Temperature: 0°F to 122°F (0°C to 50°C)
- Storage Temperature: - 50°F to 122°F (- 10°C to + 50°C)
**SR - M1 Lavalier Microphone Specifications**:
- Acoustic Principle: Electret Condenser
- Polar Pattern: Omnidirectional
- Connector: 3.5mm
- Cable Length: 4.1' (1.25m)
- Maximum SPL: 110dB
- Sensitivity: - 39dB±2dB (0dB = 1V/Pa, 1kHz)
- Signal - to - Noise Ratio: ≥60dB
- THD: <1% (94dB SPL at 1kHz)
- Power Requirements: Plug - in - Power (1V–10V)
- Standard Operating Voltage: 3V
- Current Consumption: <500μA
- Output Impedance: <2.2KΩ
Using the Saramonic Blink 500 ProX TXR is easy. First, make sure the battery is charged. You can power it via the built - in Li - ion battery, USB - C DC 5V, or the charging contact. Then, connect the lavalier microphone to the 3.5mm input if you want to use it. Next, pair the transmitter with the compatible Saramonic RX, RXDi, or RXUC receiver.
When recording, you can choose to use the onboard recording feature. This is great for backup or when you're in an area with unreliable wireless signals. Just press the relevant button to start and stop recording.
If you're using it outdoors, keep in mind that the operating range is up to 328 feet without obstacles. Try to keep the transmitter and receiver in a clear line of sight for the best signal.
As for maintenance, keep the device clean. You can use a soft, dry cloth to wipe it down. Avoid exposing it to extreme temperatures outside the recommended range of 0°F to 122°F (0°C to 50°C) during operation and - 50°F to 122°F (- 10°C to + 50°C) for storage. Also, don't forget to charge the battery regularly to ensure it's always ready for use. And if the microphone gets dirty, follow the manufacturer's instructions for cleaning it properly.
