Product Detail
The Point Source Audio CO2-8WL-XLE-BL is a top - notch black dual lavalier microphone designed for Lectrosonics. It offers full redundancy with mic elements precisely matched within +/- .05dB. The unique built - in backup design combines dual mics and their independent wire paths into a single housing and wire jacket, eliminating the hassle of messy cable dressing. The cable splits about nine inches above the body - pack transmitters, giving you enough space to separate the transmitters. Its mic element has an IP 57 rating, making it resistant to water, sweat, and makeup. This package includes a dual - element microphone, an SLIDER1 mic clip, a cable clip, and a windscreen. Key features are factory - matched elements for great sonic frequency and sensitivity, separate wire paths in a single cable that splits to two body - packs, IP 57 protection, a max SPL of up to 136 dB, optimal gain before feedback, two X - Connectors compatible with popular wireless systems, a black color option, and a patented design. Technical specs: it has (2 Matched) Back Electret Condenser elements, an omnidirectional pattern, a frequency range of 20Hz - 20kHz, a sensitivity of - 43dB 1V/Pa (+/- 3dB at 1kHz), a maximum SPL of 136dB SPL, an output impedance of 1400 Ohm (at 1kHz), an operating voltage of 1 - 10 V, a cable length of 6 ft. + connector, and a net weight of 0.6 oz.
Using this microphone is a breeze. First, attach the microphone to your clothing using the provided SLIDER1 mic clip. Make sure it's close to your mouth for the best sound capture. Connect the cable to your Lectrosonics body - pack transmitters. The cable splits, so you can connect it to two different body - packs if needed. When using it, be aware that since it's IP 57 rated, it can handle a bit of water, sweat, or makeup, but don't submerge it in water for long periods. For maintenance, gently wipe the microphone with a soft, dry cloth after each use to keep it clean. Store it in a dry place when not in use to prolong its lifespan. And always check the connectors for any signs of damage before each use.
