Product Detail
The MIPRO ACT-5801/ACT-58T is a high - performance ISM 5 GHz 1/2U single - channel digital receiver paired with a bodypack transmitter. The ACT - 5801 single - channel receiver operates at 5.8 GHz and is housed in a 1/2U metal chassis. Its panel has a MIPRO - style design, an intuitive operating procedure, a built - in high - efficiency antenna, and a graphic OLED screen for a wide, blind - spot - free view. It features stable digital modulation circuitry with all frequencies in one band. You can preset 12 interference - free channels in Group A and 24 in Group B1 & B2. Each channel allows 64 IDs and 1 specific ID to prevent interference. Group A has less interference, while Group B is for more channels or lower latency. They can't work simultaneously. The dual - tuner true diversity receiving avoids 2.4 GHz interference, ensuring long - range reception and no signal drop - outs. The precisely designed PCB in a sturdy chassis means ultra - low malfunction. The ACT - 58T has a miniature, sturdy plastic housing for easy wear. It has an adjustable belt clip and a unique battery cover. There's an antenna, mini XLR connector, mute button, and remote - control mute jack on top. It's the world's first with ACT function for quick frequency sync. The mini XLR connector accepts different plugs. Technical specs: The ACT - 5801 has a single channel, an EIA Standard 1/2U metal black case, built - in antenna, graphic OLED display, 5.725 - 5.850 MHz frequency range, dual - tuner true diversity receiving, and more. The ACT - 58T operates at ISM 5.8 GHz, has digital modulation, 20 mW RF output power (country - dependent), and supports various mic capsule modules.
Using the MIPRO ACT - 5801/ACT - 58T is easy. First, for the ACT - 58T bodypack transmitter, insert 2 AA alkaline batteries. You can use the adjustable belt clip to wear it in an up or down position. Connect your preferred mic capsule module to the mini XLR connector. You can use either a screw - lock or a TA4F quick - lock plug. The antenna on top helps with signal transmission. Press the mute button when you need to stop the audio, or use the remote - control mute jack. When using the ACT - 5801 receiver, connect it to an external 100 - 240V AC switching power supply. Use the balanced XLR or unbalanced - 6.3 mm output connectors to connect to your audio system. Adjust the output level according to your needs. To set the channels, use the ACT Sync function. Choose between Group A with less interference or Group B for more channels or lower latency. Remember, they can't operate at the same time. Regarding battery life, the ACT - 58T has a battery meter. Three green LEDs show normal battery status, and they turn red when the battery is low. The device will automatically shut down after 2 hours of low - battery warning. For maintenance, keep the devices clean. Wipe the surfaces with a soft, dry cloth. Avoid exposing them to extreme temperatures, humidity, or direct sunlight. If there's a problem, refer to the actual product in case of any discrepancy.
