Product Detail
The Lectrosonics WM Hybrid Wireless Beltpack Transmitter with VT500WATER Lavalier upgrade is a top - notch device for wet or dusty environments. It features O - ring sealed battery compartments and input jack, a compression sealed antenna port, and gasket sealed control panel and back cover. Using dual AA batteries, it offers double the operating time of earlier watertight transmitter designs. The larger membrane switches, control panel, and a highly visible, backlit LCD make the user interface a breeze to use.
Key Features:
- Selectable output power (50, 100, or 250 mW) for longer battery life or extended operating range.
- Machined aluminum housing that resists corrosion.
- Water - resistant seals for use in damp conditions.
- LCD interface with a lockout option.
- Programmable compatibility modes for use with a wide variety of receivers.
- Servo Bias input circuitry with selectable voltage.
Technical Specifications:
- Operating frequencies span multiple blocks from 470.100 - 614.300 MHz.
- Channel spacing options of 25 kHz or 100 kHz.
- RF power output can be set at 50, 100, or 250 mW.
- Compatibility modes include Nu Hybrid, IFB, and Mode 3.
- It has excellent frequency stability, low spurious radiation, and appropriate input noise levels.
- Input levels are well - defined for different types of microphones and line - level input.
- Input impedance, bias voltages, gain control range, and other technical parameters are clearly specified.
Included Accessories:
- Two dual lithium AA batteries.
- One microphone (Part #M152/WP).
- One belt clip (Part #WMBCSL).
- One O - ring kit (Part #ORINGKIT/WM).
- One quick - start guide.
Using the Lectrosonics WM Hybrid Wireless Beltpack Transmitter is easy. First, insert the two dual lithium AA batteries into the battery compartment. Make sure to follow the correct polarity. Then, connect your microphone to the 2.5 mm locking micro audio input jack. You can use the control panel with the LCD and four membrane switches to set the frequency, output power, and other settings. You can choose from different output powers like 50, 100, or 250 mW depending on whether you want to save battery or need a longer operating range.
When using it in wet or dusty environments, don't worry as it has water - resistant seals. However, try to avoid submerging it in water. Also, when not in use, keep it in a dry and clean place. If you need to change the battery, turn off the transmitter first.
For maintenance, check the O - ring kit regularly to ensure the seals are in good condition. If you notice any damage to the antenna (the flexible, unbreakable steel cable), replace it immediately. Keep the device clean by using a soft, dry cloth to wipe it down. Refer to the quick - start guide for more detailed information and troubleshooting tips.
