Electro-Voice RM-300 Single Rackmount Kit for R300 Receiver

The Electro-Voice RM-300 is an essential hardware set for neatly mounting a single R300 RX receiver into a standard 19” audio rack. Note that audio rack screws aren't included. The long bracket has 2 removable plastic plugs, which you need to take out when using the SFMC-300 coax cable kit. You can place the RM-300 on either the left or right side of the R300 RX receiver. You'll need a T15 Torx driver (not provided), and also rack screws (not supplied) for attaching it to the audio rack. Key features: It allows you to rack-mount your single R300 RX receiver. And it has 2 TNC connector-sized holes with removable 'pop-outs' for front-mounting your receiver antennas.

Using the Electro-Voice RM-300 is easy. First, make sure you have a T15 Torx driver and rack screws as they're not included in the kit. If you're using the SFMC-300 coax cable kit, remove the 2 plastic plugs from the long bracket. You can choose to place the RM-300 on the left or right side of the R300 RX receiver according to your preference. Then, use the rack screws to attach the kit to the 19” audio rack. When mounting the receiver antennas, take advantage of the 2 TNC connector-sized holes with removable 'pop-outs' at the front. As for maintenance, keep the kit clean and dry. Check the connection parts regularly to ensure they're tight. Avoid exposing it to extreme temperatures or moisture to make it last longer.