Electro-Voice RE3-ACC-CXUF Rear to Front Mount Antenna Cable Kit

The Electro-Voice RE3-ACC-CXUF Rear to Front Mount Antenna Cable Kit is a great solution for relocating a wireless receiver's antenna input jacks to the front panel of a 19” rack. It comes with a pair of high-quality, low-loss coax cables. The threaded flange mount connectors fit securely into the RMK1 or RMK2 rack mounting kits, allowing you to front-mount the stock 1/2 wave antennas or extension coax cables. The male BNC twist-on connectors on the other ends connect firmly to the receiver's antenna A and antenna B RF input jacks. Key features include two high-quality RG-58 50 OHM coax cables, a female flange mount BNC on one end for panel mounting, and a male BNC on the other end to couple with the receiver antenna input jack. Technical specs: coaxial cable type, 50 OHM impedance, 1-meter length, male BNC twist-on on one end, female BNC threaded flange mount on the other end, black color, 2 oz. (57 g) net weight, and 2.1 oz. (61 g) gross weight.

Using the Electro-Voice RE3-ACC-CXUF Rear to Front Mount Antenna Cable Kit is easy. First, find the openings in your RMK1 or RMK2 rack mounting kit. Securely fit the female flange mount BNC connectors of the cables into these openings. Then, connect the male BNC twist - on connectors to the antenna A and antenna B RF input jacks of your wireless receiver. When using this kit, make sure the connections are tight to avoid signal loss. Also, don't bend the cables too sharply as it can affect their performance. For maintenance, keep the cables clean and dry. You can use a soft cloth to wipe them if they get dirty. Store the kit in a cool and dry place when not in use to prolong its lifespan.