The Cloud Electronics PM - 1 is a top - notch passive paging microphone crafted for straightforward, single - zone applications. It pairs perfectly with any Cloud zoner and mixer - amplifier when single - zone paging is needed, and can also work with third - party zoners. This microphone boasts a heavy - duty moulded base and a 300mm gooseneck mic, offering a modern and appealing look while being tough enough for daily use, especially great for use behind bars in restaurants and other licensed spots. It comes with connections for wiring the mic audio signal and access contacts. The PTT button unmutes the mic and provides contacts (NO or NC) for the host device's access connector. Key features include being a single - zone paging microphone, having a high - quality dynamic mic on a 300mm gooseneck, coming with a windshield, a solid and heavy non - slip base, an integral PTT switch, NO or NC contacts for external mic access on the host zoner/amplifier, muting the mic when not in use, and internal cable connections with a retention strap. Technical specs: Capsule Type is Dynamic, Cardioid; Frequency Response ranges from 80 Hz to 15 kHz; Sensitivity is - 54dB + - 3dB (0dB = 1 V/Pa at 1kHz); Type is Momentary; Contacts are NO and NC; Audio is Balanced, 3.5mm pitch screw terminals; Control is NO/NC, 3.5mm pitch screw terminals; Cable Access is at the rear with a 9mm max. diameter and internal retention; Base Dimensions are 5.9 x 5.9 x 1.7 in; Gooseneck Length (inc. capsule) is 12.28”; Weight is 0.95 lbs.
Using the Cloud Electronics PM - 1 is easy. First, connect the mic audio signal and access contacts using the provided connections. When you want to use the mic, press the PTT button. It'll unmute the mic and provide contacts for the host device. Remember, the mic is muted when not in use. For placement, its solid, non - slip base keeps it stable, whether you're using it in a restaurant or other place. As for maintenance, keep it clean and dry. Don't expose it to extreme temperatures or moisture. If you need to move or store the mic, the internal cable connections with a retention strap help keep the cables in place. Also, the windshield that comes with it can be used to reduce wind noise. If you have any issues, check the connections and make sure the host device is set up correctly.
