Elevate your audio experience with the Audio-Technica BP893xcW Omnidirectional Earset Microphone. Tailored for professionals craving high - end sound, this earset sports an ergonomic under - ear design and a nearly invisible 0.2' boom, perfect for discreet use. Its subminiature condenser capsule guarantees crystal - clear vocal delivery, making it a top pick for stage artists, broadcasters, and public speakers. It can hook around either ear and extend below subtly, offering both comfort and top - notch audio quality.
The BP893x, equipped with a high - SPL omnidirectional condenser capsule, provides an extended frequency response that reproduces natural vocals just like premium lavalier microphones. The detachable, field - replaceable cable comes with a sturdy connector at the earset and multiple output terminations, suitable for both wired and wireless setups. Whether you're on stage or in the studio, expect clear and natural sound reproduction.
Beyond its amazing audio performance, the BP893xcW is built to last and be comfortable. Its lightweight, hypoallergenic material ensures a secure fit without any discomfort, even after long - term use. The included AT8464x Dual - Ear Adapter Kit enhances stability by converting it from a single - ear to a dual - ear setup, ideal for active users. With all these features, the BP893xcW is the ultimate solution for those seeking high - end audio in a sleek, unobtrusive design.
**Key Features**:
- Omnidirectional condenser capsule for extended frequency response and natural vocal reproduction
- Lightweight and ergonomic design
- Ultra - unobtrusive 0.2' boom
- Secure under - the - ear placement
- Detachable, field - replaceable cable with a strong connector and various output terminations
- Wired version's power module (AT8545) has a high - pass filter for better sound pickup
- Comes with AT8464x Dual - Ear Adapter Kit for more stability and comfort
- Made of hypoallergenic material
**Specifications**:
- Element: Fixed - charge back plate, permanently polarized condenser
- Polar Pattern: Omnidirectional
- Frequency Response: 20 - 20,000 Hz
- Low Frequency Roll - Off: 80 Hz, 18 dB/octave (wired only)
- Open Circuit Sensitivity: - 38 dB (11.8 mV) re 1V at 1 Pa
- Impedance: 250 ohms (wired only)
- Maximum Input Sound Level: 131 dB SPL, 1 kHz at 3% T.H.D.
- Dynamic Range (Typical): 100 dB, 1 kHz at 3% T.H.D. Max SPL (wired only)
- Signal - to - Noise Ratio: 63 dB, 1 kHz at 1 Pa
- Phantom Power Requirements: 11 - 52V DC, 2 mA typical (wired only)
- Current Consumption: 0.2 mA typical at 5V (wireless only)
- Voltage Range: 2.5 - 10V (wireless only)
- Switch: Flat, roll - off (wired only)
- Weight: Microphone, boom & earpiece: 2.0 g (0.07 oz); Power module (wired only): 85 g (3.0 oz)
- Dimensions: Microphone: 9.5 mm (0.37') long, 2.6 mm (0.10') diameter; Boom: 5.2 mm (0.2') long, 1.07 mm (0.04') diameter; Power module (wired only): 100.0 mm (3.94') long, 18.9 mm (0.74') diameter
- Output Connector (Power Module): Integral 3 - pin XLRM - type
- Cable: Detachable 1.4 m (55') long, 1.6 mm (0.06') diameter, 2 - or 3 - conductor shielded cable (termination dependent)
- Audio - Technica Case Style: M31
**Package Contents**:
- AT8545 power module (wired only)
- AT8464x dual - ear adapter kit
- AT8440 cable clip
- AT8157 windscreen
- AT8171 windscreen
- Two AT8156 element covers
- Moisture guard
- Belt clip (wired only)
- Carrying case
Using the Audio - Technica BP893xcW Omnidirectional Earset Microphone is a breeze. First, decide if you want to use the single - ear or dual - ear setup. If you choose the dual - ear option, use the included AT8464x Dual - Ear Adapter Kit to convert it. Then, hook the earset around your ear and position the 0.2' boom close to your mouth for the best sound capture.
For the wired version, connect the detachable cable to the earset and the power module (AT8545). You can use the high - pass filter on the power module to improve sound pickup. For the wireless version, make sure the voltage is within the 2.5 - 10V range and the current consumption is around 0.2 mA at 5V.
When it comes to maintenance, keep the microphone clean. Use the included windscreen and element covers to protect it from dust and moisture. If the cable gets damaged, it's field - replaceable. Just make sure to choose the right output termination for your needs.
Some important notes: Don't expose the microphone to extreme temperatures or humidity. If you're using the wired version, make sure to provide the correct phantom power between 11 - 52V DC with a typical current of 2 mA. Also, since the earset is made of hypoallergenic material, it's great for long - term use, but still handle it gently to ensure its durability.
