Product Detail
In the video production industry, the demand for high - quality audio is soaring as high - resolution content becomes the norm. Content creators today need to capture top - notch audio fast, reliably, and with limited resources. The Sony UWP - D series, including the UTX - M40/14, is the perfect solution. It offers outstanding sound quality through digital processing, reliable RF transmission, true double - tuner diversity reception, and user - friendly features, making it great for ENG, EFP, documentaries, and weddings.
Key Features:
- High - quality sound via Sony's digital audio processing.
- NFC SYNC for quick and secure channel setting (IR sync with URX - P03, URX - P03D, and URX - S03D receivers).
- Interchangeable head for a wide range of microphone capsules.
- Auto gain mode for volume control.
- +15 dB gain boost for off - mic audio.
- Transmitter frequency sent to receiver for multi - receiver matching.
- Variable muting function.
- Compatible with Sony WL - 800/UWP/UWP - D series.
- High - visibility OLED display for indoor and outdoor use.
Technical Specifications:
- Oscillator Type: Crystal - controlled PLL synthesizer.
- Antenna Type: 1/4 wavelength wire antenna.
- Carrier Frequencies: Multiple frequency ranges available for different regions.
- RF Output Power: Selectable power options depending on the model.
- Capsule Type: Dynamic.
- Directivity: Uni - directional.
- Reference Audio Input level: - 55 dBV (GAIN MODE set to NORMAL, 0 dB attenuation).
- Maximum Audio Input Level: 151 dB SPL (21 dB attenuation, using supplied microphone unit).
- Audio Attenuator Adjustment Range: 0 dB to 21 dB (3 dB steps).
- Frequency Response: Varies by model.
- Signal - to - Noise Ratio: Different values based on gain mode.
- Distortion: 0.9% or less (- 60 dBV, 1 kHz input).
- Audio Delay: Approx. 0.35 ms.
- Tone Signal Frequency: Different frequencies in different compander modes.
- Display: OLED.
- Power Requirements: DC 3.0 V (two LR6/AA alkaline batteries) or DC 5.0 V (USB Type - C).
- Battery life: Varies by output power and model.
- Operating Temperature: 0°C to 50°C (32°F to 122°F).
- Storage/Transport Temperature: - 20°C to +55°C (- 4°F to +131°F).
- Dimensions: - 48 - 258 mm (1 15/16 - 10 1/4 in.) (diameter / length).
- Mass: Approx. 255 g (9.0 oz) (excluding batteries).
Using the Sony UTX - M40/14 UWP - D wireless microphone transmitter is easy. First, insert two LR6/AA alkaline batteries into the transmitter or connect it to a DC 5.0 V power source via the USB Type - C connector. Turn it on and use the NFC SYNC function to quickly set up a secure channel with compatible receivers. If you're using it with other receivers, the transmitter will send its frequency to the receiver for easy matching.
When recording, the auto gain mode helps keep the volume consistent. If you need to boost the off - mic audio, switch to the +15 dB gain boost mode. The interchangeable head allows you to choose different microphone capsules according to your needs.
Here are some important notes. The operating temperature of the transmitter is between 0°C and 50°C (32°F to 122°F), so avoid using it in extreme heat or cold. When storing or transporting it, keep it in a temperature range of - 20°C to +55°C (- 4°F to +131°F).
For maintenance, keep the transmitter clean and dry. If the OLED display gets dirty, gently wipe it with a soft, dry cloth. When not in use for a long time, remove the batteries to prevent leakage. This way, your transmitter will serve you well for a long time.
