Product Detail
The Shure P3TR112GR is a part of the PSM 300 wireless systems family. This stereo personal monitor system offers reliable wireless freedom across the stage. With patented Audio Reference Companding, it delivers the clearest sound with ultra - low noise and no artifacts.
It's incredibly easy to set up and operate. The one - touch frequency scan and sync feature helps you quickly find and assign a clean wireless channel. You can adjust the volume and use MixMode technology or stereo mode to create a personalized 2 - channel audio mix.
Key Features:
- P3R: Create a personal 2 - channel mix using MixMode or stereo mode. It has easy - to - adjust volume and mix controls. The scan function rapidly finds an open frequency. With over 90 dB of dynamic range, it provides precise, low - noise audio. It can run up to 6 hours continuously on 2 AA batteries and its slim, lightweight bodypack easily attaches to a belt or guitar strap.
- P3T: Sends a stereo or mono mix wirelessly to performers onstage. It offers detailed, 24 - bit digital audio. It has a rock - solid analog wireless connection within a 300 - foot (90 - meter) range. The one - touch IR sync instantly links the transmitter to the bodypack receiver. It has a high - contrast LCD screen with audio metering, selectable line/aux level, 1/4 - inch (6.3 mm) TRS balanced inputs and loop outputs, a detachable 1/4 wave antenna, and comes with a rack hardware kit.
Technical Specifications:
- Included: P3R, P3T, SE112, rackmount and hardware kits, 1/4 wave antenna, BNC bulkhead adapter, BNC cable, power supply, 2 AA batteries, zipper bag, and user guide.
- P3R: Active RF Sensitivity (at 20 dB SINAD) is 2.2 μV. Image Rejection is >90 dB, Adjacent Channel Rejection is >60 dB, Intermodulation Attenuation is >50 dB, Blocking is >60 dB. Audio Output Power 1 kHz @ <1% Distortion, Peak Power, @32 ohm is 80 mW (per output). Minimum Load Impedance is 16 ohm. Headphone Output is 3.5 mm (1.8 inch) stereo. Net Weight is 98 g (3.5 oz.) (without batteries). Dimensions are 110 × 64 × 21 mm (4.3 x 2.5 x 0.8 in.). Battery Life is 5 - 7 hours (continuous use) on AA batteries.
- P3T: RF Output Power is 10, 20, 30 mW (varies by region). RF Output Impedance is 50 ohm (typical). Net Weight is 783 g (27.6 oz.). Dimensions are 43 × 198 × 172 mm (1.7 × 7.8 × 6.8 in.). Power Requirements are 12 - 15 V DC, 260 mA maximum.
Using the Shure P3TR112GR PSM300 Wireless Personal Monitor System is a breeze. First, set up the P3T transmitter. Connect it to your audio source using the 1/4 - inch (6.3 mm) TRS balanced inputs. You can choose the line/aux level according to your needs. Make sure to attach the detachable 1/4 wave antenna properly for a good wireless connection.
For the P3R bodypack receiver, insert 2 AA batteries. The battery life is around 5 - 7 hours of continuous use. Then, use the one - touch IR sync to link it with the P3T transmitter. Once synced, you can start adjusting the volume and creating your personal audio mix using MixMode or stereo mode.
When it comes to using it on stage, the system offers a reliable wireless connection within a 300 - foot (90 - meter) range, so you can move freely.
Here are some important notes: Don't expose the system to extreme temperatures or moisture. When not in use, store it in the provided zipper bag. If you're traveling, be aware that the RF output power may vary by region.
For maintenance, keep the system clean. You can use a soft, dry cloth to wipe the bodypack and the transmitter. Check the batteries regularly and replace them when the power is low. Also, if you're not using the rackmount, store the rack hardware kit in a safe place.
