The Sennheiser SK 500 G4 - GW1 is a top - notch bodypack transmitter crafted for seamless performance on even the most challenging live stages. It's a key part of the Evolution Wireless G4 500 Series, offering enhanced bandwidth and superior transmission power. Whether you're a singer, speaker, or performer, this transmitter guarantees reliable, clear, and robust audio, so you'll always be heard clearly.
This versatile device supports frequencies from 558 - 608 MHz (GW1), with an amazing 88 MHz bandwidth and 3520 selectable frequencies in a stable UHF range. The infrared - enabled wireless synchronization between the transmitter and receiver is quick and easy, reducing setup time and increasing reliability. You can adjust the high RF output power in three steps (10/30/50 mW) according to your needs and local regulations.
For complex multi - channel setups, it has an Ethernet connection for integration with the Wireless Systems Manager (WSM) control software. Its compact, user - friendly design and durable build make it a must - have for professionals seeking high - quality wireless audio transmission.
Key Features:
- Powerful bodypack transmitter with boosted bandwidth and transmission power
- Effortless wireless synchronization between transmitter and receiver via infrared
- Up to 32 compatible channels
- 88 MHz bandwidth with 3520 selectable frequencies in a stable UHF range
- Ethernet connection for WSM control software for advanced frequency coordination
- Adjustable high RF output power (up to 50 mW) based on country regulations
Specifications:
- Dimensions: About 82 x 64 x 24 mm
- Compander: Sennheiser HDX
- THD (total harmonic distortion): <= 0.9%
- Weight (including batteries): around 160 g
- Signal - to - noise ratio: >= 115 dBA
- RF output power: switchable (10/30/50 mW)
- Switching bandwidth: up to 88 MHz
- Peak deviation: +/-48 kHz
- Nominal deviation: +/-24 kHz
- Operating time: Usually 8 h
- Modulation: Wideband FM
- Power supply: 2 AA batteries (1.5 V) or BA 2015 accupack
- Current consumption: at nominal voltage, about 180 mA; when off, <= 25 A
- Input impedance: 40 k Ohm (unbalanced) / 1 M Ohm
- Max. Input voltage: 3 Veff
- Powering: 3 V battery / 2.4 V rechargeable battery
- Transmission frequency: Up to 3520 frequencies, adjustable in 25 kHz steps, 20 frequency banks with up to 32 factory - preset channels, 6 frequency banks with up to 32 programmable channels
- AF frequency response: Mic: 80 - 18,000 Hz, Line: 25 - 18,000 Hz
- Temperature Range: - 10 C to +55 C
- Frequency stability: <= +/-15 ppm
Package Contents:
- SK 500 G4 bodypack transmitter
- 2 AA batteries
- Pouch
- Quick guide
- Safety guide
- Manufacturer declaration sheet
Using the Sennheiser SK 500 G4 - GW1 is a breeze. First, insert the 2 AA batteries or connect the BA 2015 accupack. Then, sync it with the receiver using the infrared function. You'll have your audio up and running in no time.
When adjusting the frequency, remember to follow the local regulations. You can use the Wireless Systems Manager (WSM) control software for complex multi - channel setups, just connect it via the Ethernet port.
Keep in mind that the operating temperature range is from - 10 C to +55 C. Don't expose it to extreme temperatures, as this can affect its performance.
For maintenance, keep the device clean. You can use a soft, dry cloth to wipe it. If you're not using it for a long time, remove the batteries to prevent leakage.
Also, check the batteries regularly. The device typically operates for about 8 hours, so plan accordingly for your events. Enjoy your high - quality wireless audio with the Sennheiser SK 500 G4 - GW1!
