Product Detail
The Sennheiser EW - DX MKE 2/835 - S SET Wireless Combo Microphone System combines decades of Sennheiser's research with advanced technology, offering a top - notch professional audio experience. It features a powerful digital UHF system that easily meets the diverse needs of classrooms, corporate campuses, and live productions. With equidistant channel spacing, it efficiently deploys frequencies. You can remotely monitor it via the Sennheiser Control Cockpit, Wireless Systems Manager, and Smart Assist App. This system comes with in - device charging, a 12 - hour battery life, and an 88 - MHz switching bandwidth, making it perfect for various professional scenarios. The advanced Sennheiser Performance Audio Codec (SePAC) provides a 134 dB dynamic range, eliminating the need for gain adjustments and ensuring crystal - clear sound. AES 256 encryption guarantees secure confidential transmissions within local RF regulations.
**Key Features**:
- 134 dB input dynamic range with SePAC, no gain adjustments needed.
- AutoScan quickly scans the environment for optimal channel spacing.
- Network - enabled for remote control via multiple systems.
- Remote control via Smart Assist App up to 25 meters.
- AES 256 encryption for secure content transmission.
- 12 - hour operation with rechargeable BA 70 battery.
- Function buttons on the handheld transmitter for direct control.
- Persistent E - Ink display shows info even without batteries.
- Equidistant channel spacing in two modes for multiple channels.
- 1.9 ms low - latency wireless transmission.
- Transmitters support in - device charging.
- Compatible with a wide range of Sennheiser and Neumann capsules.
**Specifications**:
- Audio link frequency: 941.700 - 959.650 MHz
- BLE frequency: 2405 - 2480 MHz
- Audio frequency response: 20 Hz - 20 kHz (- 3 dB)
- Total harmonic distortion: - 60 dB for 1 kHz
- System latency: 1.9 ms
- Operating temperature: - 10°C to + 55°C (14°F to 131°F)
- Operating relative humidity: 5 - 95% (non - condensing)
- EW - DX EM 2 Rack Receiver: Input voltage 11 - 13 V, current 1A
- Ethernet: RJ - 45 socket, IEEE802.3, 100Base - TX, 10Base - T (CAT5e or higher)
- EW - DX SKM Handheld Transmitter: Input voltage 2.0 - 4.35 V, current 300 mA
- MMD 835 Microphone Module: Dynamic transducer, cardioid pattern, SPL 154 dB
- EW - DX SK Bodypack Transmitter: Input voltage 2.0 - 4.35 V, current 300 mA
- MKE 2 Lavalier Microphone: Pre - polarized condenser, omni - directional, 5 mV/Pa sensitivity, 142dB SPL
- Weight: EW - DX EM 2 approx. 1000 g; EW - DX SKM - S approx. 304 g with module
**Package Contents**:
- EW - DX EM 2 rack receiver
- EW - DX SKM - S handheld transmitter with MMD 835 microphone module
- EW - DX SK bodypack transmitter
- MKE 2 lavalier microphone (omni - directional)
- EW - D Power Supply with country adapters
- 2 BA 70 rechargeable battery packs
- MZQ 1 microphone clamp
- 2 rod antennas
- GA 3 rack mount kit
- 4 rubber feet
Using the Sennheiser EW - DX MKE 2/835 - S SET is easy. First, charge the BA 70 rechargeable batteries. Then, connect the power supply to the rack receiver. You can place the rack receiver in a stable location. For the handheld transmitter, just turn it on using the function buttons. The bodypack transmitter can be clipped to your clothing. The lavalier microphone can be attached to your collar or lapel.
When using, keep the transmitters and receiver within a reasonable distance, especially when using the Smart Assist App for remote control, which has a range of up to 25 meters. Also, make sure the operating environment temperature is between - 10°C and + 55°C and the relative humidity is 5 - 95% (non - condensing).
For maintenance, clean the microphones regularly with a soft cloth. When not in use, store the system in a dry place. Don't forget to charge the batteries every few months to keep them in good condition. And always follow local RF regulations to ensure proper and legal use of the system.
