Product Detail
The Point Source Audio CO-5W-MP-BE is a high - quality condenser earworn microphone in a stylish beige color, equipped with a MiPro 4 pin mini connector. It's a single over - ear model, perfect for speech applications. The package includes a microphone, a body clip, and a windscreen. This CO - 5W waterproof microphone is built tough for vocal reinforcement. It can handle moisture, sweat, and stage makeup with its water - protected element. Whether you're sweating due to humidity, splashed by something, or caught in the rain, this microphone won't let you down. It has an impressive IP Rating of 57, offering great particle and liquid protection. With an omni - directional polar pattern, it can pick up sound in a full 360 - degree range, giving you a natural blend of voice and ambience. Key features include the ability to be worn on the left or right ear, a boom that can bend up to 30 degrees, protection from full immersion in water between 15cm to 1m for up to 30 minutes, defense against sweat and makeup, ultra - low profile, optimized clarity, increased gain before feedback, and a durable construction. Technical specs: It has a 4 - pin mini connector for MiPro, a back electret condenser element, an omnidirectional pattern, an IP Rating of 57, a frequency range of 40 Hz - 17kHz, a sensitivity of - 47 dB 1V/Pa (Nominal Sensitivity +/- 3dB at 1kHz), a maximum SPL of 125dB, an output impedance of 2,000 ohm ± 30% (at 1kHz), an operating voltage of 1.5V - 10VDC, a cable length of 4 ft 2 in + connector, a net weight of 0.6 oz, and comes in beige. The boom flexibility allows no single bend to exceed 20 degrees, and it can be placed on the left or right ear. Included accessories are a windscreen, clothing clip, and storage box.
Using your Point Source Audio CO - 5W microphone is a breeze. First, decide whether you want to wear it on your left or right ear. Then, gently bend the boom up to 30 degrees to position the microphone close to your mouth for the best sound pickup. Clip the body clip to your clothing to keep the microphone in place. When it comes to the cable, make sure it's not tangled and connected properly to your device using the MiPro 4 - pin mini connector. Now for the precautions. Don't bend the boom more than 20 degrees at a single time as it might damage the microphone. Avoid exposing it to extreme temperatures or direct sunlight for long periods. Also, although it's waterproof, don't leave it submerged in water for longer than 30 minutes between 15cm to 1m. For maintenance, after each use, wipe the microphone with a soft, dry cloth to remove any sweat or makeup. You can clean the windscreen with mild soap and water, then let it dry completely before reattaching it. Store the microphone in the provided storage box to protect it from dust and scratches. With these simple steps, your microphone will serve you well for a long time.
