Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 24

The Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 24 is a great choice. It has an overall length of about 36 inches and comes with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block, marked with a color band and tag for easy identification. This antenna is perfect for applications where a small remote antenna is needed. It's useful when you need to keep some distance between equipment and its antenna. For example, in a multichannel bag system, it can reduce RF interference that might affect standard whip antennas, and can be placed on the bag strap. Also, it can be used when clothing or other gear might cover or hinder equipment performance. The antenna can be positioned for maximum effectiveness. Remember, for best results, position the antenna vertically, either pointing up or down. Each half of the antenna is cut to 1/4 wavelength of the corresponding block. When using it, keep the antenna section away from metal surfaces, while the orientation of the remaining cable doesn't affect its performance.

Using this Lectrosonics coaxial antenna is easy. First, identify the frequency block with the color band and tag on the antenna. Then, position it vertically - it can point up or down. You can place it on a bag strap in a multichannel bag system to reduce RF interference, or in a place where it won't be covered by clothing or other gear. When using, make sure the antenna section is away from metal surfaces. As for maintenance, there's not much to do. Just keep it clean and store it in a dry place when not in use. The orientation of the cable part doesn't matter, so you don't have to worry about that. If you follow these steps, your antenna will work effectively for a long time.