Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 23

The Lectrosonics ACOAXTX coaxial antenna is about 36 inches long and comes with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block, marked with a color band and tag. It's great for applications needing a small remote antenna. This antenna is perfect when you need to keep some distance between equipment and the antenna. For example, in a multichannel bag system, standard whip antennas may lose effectiveness due to RF interference in the bag. But you can position this coaxial antenna on the bag strap. Also, it can work well when clothing or other gear might affect equipment performance. Just place it where it can perform best. Remember, for maximum effectiveness, the antenna should be vertical, either pointing up or down. Each half of the antenna is cut to 1/4 wavelength of the corresponding block. When using it, keep the antenna section away from metal surfaces. The orientation of the rest of the cable doesn't affect the antenna's performance.

Using this Lectrosonics coaxial antenna is easy. First, connect it to your equipment using the SMA connector. When placing it, think about where it can work best. If you're using it with a multichannel bag system, attach it to the bag strap. Make sure the antenna is in a vertical position, either pointing up or down. This will give you the best results. Also, keep the antenna section away from any metal surfaces as they can interfere with its performance. As for maintenance, just keep it clean and dry. If it gets dirty, you can gently wipe it with a soft cloth. Don't bend the antenna too much as it might affect its performance. With these simple steps, your antenna will work well for a long time.