Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 20

The Lectrosonics ACOAXTX is a 36 - inch coaxial antenna with an SMA connector designed for Block 20. Measuring about 36 inches overall, it has an SMA connector at one end. The other end is cut to a 1/4 wavelength of the corresponding frequency block, marked with a color band and tag for easy identification. This antenna is a great choice when you need a small remote antenna. It's perfect for separating equipment from its antenna. For example, in a multichannel bag system, standard whip antennas may be less effective due to RF interference inside the gear bag. With this coaxial antenna, you can place it on the bag strap. Also, it can be used when clothing or other gear might cover or affect equipment performance. You can position it where it works best. Remember, for maximum effectiveness, the antenna should be vertical, either pointing up or down. Each half of the antenna is cut to 1/4 wavelength of the block, and when in use, keep the antenna section away from metal surfaces. The orientation of the cable doesn't affect the antenna's performance.

Using the Lectrosonics ACOAXTX coaxial antenna is easy. First, identify the frequency block on the color - banded tag at the end of the antenna. Then, connect it to your equipment using the SMA connector. When positioning the antenna, make sure it's in a vertical orientation, either pointing up or down. This will give you the best performance. If you're using it with a multichannel bag system, attach it to the bag strap to avoid RF interference. Also, keep the antenna section away from metal surfaces as this can affect its effectiveness. As for maintenance, there's not much you need to do. Just keep it clean and dry. Check the connector regularly to make sure it's in good condition and firmly attached to your equipment.