Hollyland LARK M2S Combo 2.4 GHz 2-Person Wireless Microphone System, Space Gray

The Hollyland LARK M2S Combo is a must - have wireless microphone system for mobile journalism and content creation. In a sleek space - gray finish, it comes with two ultra - compact transmitters. These transmitters have built - in omnidirectional microphones, which can discreetly capture high - quality audio. There are two types of receivers: a camera - mount receiver and a USB - C plug - in receiver, allowing seamless connection with cameras and mobile devices. Operating on a 2.4 GHz frequency band, the LARK M2S offers stable audio transmission. It can reach up to 1000 feet, ensuring great performance in various recording scenarios. The system captures 24 - bit, 48 kHz audio with a 70 dB signal - to - noise ratio and a 116 dB SPL, picking up every audio detail. The transmitters feature a titanium clip - on design for secure and unobtrusive use on cameras. The charging case not only stores the components but also charges them efficiently for long - term recording. It's also compatible with the LarkSound app, enabling real - time audio monitoring, firmware updates, and parameter adjustments from your smartphone. Key Features: Ultra - compact transmitters with built - in omnidirectional microphones; Versatile connectivity with camera - mount and USB - C plug - in receivers; Stable 2.4 GHz audio transmission up to 1000'; High - quality 24 - bit, 48 kHz audio capture; 70 dB signal - to - noise ratio and 116 dB SPL; Titanium clip - on design for secure attachment; Charging case for efficient power management; Compatibility with LarkSound app for enhanced control. Technical Specifications: Transmission Range: Up to 1000 feet (300 meters) line - of - sight; Frequency Response: 20 Hz – 20 kHz; Signal - to - Noise Ratio: 70 dB; Sound Pressure Level: 116 dB SPL; Bit Depth: 24 - bit; Sample Rate: 48 kHz; Transmitter Dimensions: Approximately 1.0' (diameter) x 0.4' (depth); Receiver Dimensions: Camera - Mount Receiver: Approximately 1.6' x 1.0' x 0.8'; Charging Case Dimensions: Approximately 3.4' x 2.1' x 1.5'; Transmitter Weight: Approximately 0.3 oz; Receiver Weight: Camera - Mount Receiver: Approximately 0.5 oz; Charging Case Weight: Approximately 3.9 oz; Transmitter Battery Capacity: 85 mAh; Receiver Battery Capacity: Camera - Mount Receiver: 145 mAh; Transmitter Operating Time: Up to 9 hours; Receiver Operating Time: Camera - Mount Receiver: Up to 8.5 hours; Charging Time: Less than 1.5 hours for transmitters; less than 2 hours for charging case; Operating Temperature: 14°F to 113°F (-10°C to 45°C). What's Included: 2 x Ultracompact Transmitters with Built - In Omnidirectional Microphones; 1 x Camera - Mount Receiver; 1 x USB - C Plug - In Receiver; 1 x USB - C to Lightning Adapter Cable; 1 x Charging Case; 2 x Windscreens; 1 x 3.5mm TRS Cable; 1 x USB - C Charging Cable; User Manual.

Using the Hollyland LARK M2S is a breeze. First, take the transmitters and receivers out of the charging case. Clip the transmitters onto your clothes or attach them to the camera using the titanium clip. Connect the receivers to your camera or mobile device, either with the camera - mount receiver or the USB - C plug - in receiver. If you're using a mobile device, you might need the USB - C to Lightning Adapter Cable. When recording, make sure there's a clear line - of - sight between the transmitters and receivers, as this can affect the transmission range. Don't go beyond the 1000 - foot limit for best results. For better audio quality, put the windscreen on the transmitters when recording outdoors. To charge the devices, just put the transmitters back in the charging case and connect the case to a power source with the USB - C charging cable. It takes less than 1.5 hours to charge the transmitters and less than 2 hours to charge the case. Keep the system in a place where the temperature is between 14°F and 113°F (-10°C to 45°C). Avoid exposing it to extreme heat or cold. Also, use the LarkSound app to monitor the audio in real - time and adjust settings as needed. This app can also help you update the firmware. Clean the system regularly with a soft, dry cloth. Don't use any harsh chemicals, as they can damage the devices. If you have any problems, refer to the user manual that comes with the system.