The Countryman E6 Flex Directional Earset Mic for General Speaking is a top - notch miniature earset microphone perfect for various events like concerts, performances, and singing. It's almost invisible to live or broadcast audiences, and you'll forget you're wearing it because of its extreme comfort. This mic excels at receiving excellent sound while effectively blocking wind, ambient noise, and feedback. It features a tiny mic capsule on a super - flexible and lightweight boom. The design combines the classic E6 fit with the flexibility of the E6i. The front boom is like the E6i, and the ear section is similar to the classic E6, resulting in the best - fitting and easiest - to - use earset around. It comes with useful accessories such as a snap - on cable with a specified connector, a windscreen, a set of three protective caps, a set of two collar clips, and a carrying case. Key features include a Switchcraft TA3F - Female for AKG, a 2mm diameter cable, optimization for general speaking, directional pickup, and a cocoa color. Technical specs: It has a condenser transducer, a directional polar pattern, a frequency response of 30Hz to 15kHz +/- 3dB, a signal - to - noise ratio with equivalent acoustic noise of 24dBA SPL, a maximum input sound level of 125dB SPL. Power requirements are an operating current of 500uA, an operating voltage of 1 to 2V, and power supply voltages of +3V with 2.7k ohm load, +5V with 6.8k ohm load, and +9V with 15k ohm load. It has an output impedance of 2k ohms, an output connector of Switchcraft TA3F - Female for AKG transmitters, and weighs only 0.07 oz (2 g).
Using this Countryman E6 Flex Directional Earset Mic is a breeze. First, put the earset on your ear, adjusting it to fit comfortably. Then, connect the snap - on cable to your AKG transmitter using the Switchcraft TA3F - Female connector. You're all set to start speaking or performing. When using it outdoors, make sure to attach the windscreen to reduce wind noise. As for maintenance, after each use, gently clean the mic capsule with a soft, dry cloth. Store the protective caps on the mic when not in use to prevent damage. Keep all the accessories in the carrying case provided to avoid losing them. Remember, don't expose the mic to extreme temperatures or moisture, as this can affect its performance. And if you're not sure about any part of the power requirements, always double - check the technical specs to ensure proper operation.
