The Audio-Technica ATW-1101/H92 is a top - notch 2.4GHz digital wireless headworn microphone system perfect for lecturers and similar professional uses where clear vocal reproduction is essential. This set comes with the ATW - R1100 digital receiver, the ATW - T1001 UniPak pocket transmitter, and a sleek black PRO 92cW headworn microphone. It uses 24 - bit, 48 kHz digital audio and operates interference - free in the 2.4 GHz frequency range. You can expand your setup and use up to eight systems at the same time. The PRO 92cW is a condenser headworn microphone with a flexible boom and a well - shaped earpiece that fits either ear. Its frequency response is tuned for clear speech without any sound coloring. With an omnidirectional polar pattern, it has a large pick - up radius, ensuring accurate capture of your speech or performance. You can speak comfortably with the mic near the corner of your mouth. The mic has a windscreen to filter out breath pops and wind noise and a 55' cable ending with a locking 4 - pin connector for the transmitter. The ATW - 1101/H92 system is engineered to quickly find the best signal. It has an automatic frequency selection function that picks open bands when you pair the transmitter and receiver. To combat interference, it uses frequency, time, and space diversity techniques. The receiver offers balanced XLR and unbalanced 1/4' outputs for easy connection to various sound systems. The microphone is built to last, and the set includes a clothing clip to prevent cable weight from pulling the headset and a pouch for mic storage. There are level controls on both the transmitter and receiver, a pair indicator on the receiver, and an AF Peak indicator to monitor input clipping. Technical specs include an operating frequency of 2.4 GHz ISM band, a dynamic range of >109 dB (A - weighted), and more.
Using the Audio - Technica ATW - 1101/H92 system is easy. First, put on the PRO 92cW headworn microphone. Adjust the flexible boom so the mic is near the corner of your mouth. Make sure the earpiece fits comfortably on either ear. Next, insert two 1.5V AA batteries into the ATW - T1001 UniPak pocket transmitter. Then, pair the transmitter with the ATW - R1100 digital receiver using the automatic frequency selection function. Once paired, the pair indicator on the receiver will light up. Connect the receiver to your mixer or sound system using either the balanced XLR output or the unbalanced 1/4' output. Adjust the level controls on both the transmitter and receiver to get the best sound. When using the system, keep it within the 30m (100') operating range and in an environment with a temperature between 0°C to 40°C (32°F to 104°F). Avoid areas with strong TV interference since the system operates in the 2.4 GHz frequency range. For maintenance, clean the microphone regularly with a soft, dry cloth. Check the windscreen for any debris and replace it if necessary. When not in use, store the microphone in the included pouch and keep the transmitter and receiver in a dry place. Also, remember to remove the batteries from the transmitter if you won't be using it for a long time to prevent battery leakage.
