AKG GN50 E 5-pin 20 Inch High Performance Modular Gooseneck Module, DAM Series

The AKG DAM Series GN50 E 5-pin 20-inch high-performance modular gooseneck module is a top - notch choice for both fixed and mobile installations. It features a five - pin XLR connector. This special connector allows separate feeding of the audio signal and the control voltage for the extra - large LED ring. Thanks to this design, you can remotely activate the LED ring using a logic output from an automatic mixer. The LED ring, with its large size, offers enhanced visibility. Available in three lengths - 15cm (6in), 30cm (12in), and 50cm (20in), this gooseneck module can fit all DAM Series capsules such as CK31, CK32, CK33, CK47, and CK80 through highly reliable contacts. Key features include a 5 - pin XLR connector gooseneck and an extra - large LED ring indicator. Technical specs: audio frequency bandwidth is 20 - 20000 Hz, recommended load impedance is 6000 Ohm, it has a matte dark gray finish, operates on a voltage of 9 to 52 V with a current of 3 mA, has a height of 1490 mm and a diameter of 20 mm, and its audio output is a balanced male XLR type.

Using this AKG gooseneck module is quite straightforward. First, connect the five - pin XLR connector to your audio setup. You can then attach one of the compatible DAM Series capsules like CK31 or CK32. To turn on the LED ring, use the logic output from an automatic mixer. When using it, make sure to connect it to a power source within the 9 - 52 V voltage range. Avoid exposing the module to extreme temperatures or humidity. For maintenance, gently wipe the module with a dry cloth. If you need to clean it, use a mild cleaning solution. Regularly check the contacts to ensure a good connection. And that's all you need to know to get the most out of your AKG gooseneck module.