Product Detail
The Lectrosonics WM Hybrid Wireless Beltpack Transmitter with VT500 WATER Lavalier Upgrade is perfect for wet or dusty environments. It features O - ring sealed battery compartments and input jack, a compression sealed antenna port, and gasket sealed control panel and back cover. Using dual AA batteries, it offers twice the operating time of earlier watertight transmitter designs. The larger membrane switches, control panel, and highly visible backlit LCD make the user interface easy to use. Key features include selectable output power (50, 100 or 250 mW) to maximize battery life and ensure excellent operating range, a machined aluminum corrosion - resistant housing, water - resistant seals for wet conditions, an LCD interface with a lockout option, programmable compatibility modes for various receivers, servo bias input circuitry with selectable voltage. Technical specs cover a wide range of frequencies from 470.100 - 614.300 MHz, with 25 kHz or 100 kHz channel spacing. It has multiple input levels for different types of microphones and line - level input, adjustable bias voltages, a 44 dB gain control range, and more. Included accessories are 2 dual lithium AA batteries, 1 microphone (Part #M152/WP), 1 belt clip (Part #WMBCSL), 1 O - ring kit (Part #ORINGKIT/WM), and 1 quick - start guide.
Using the Lectrosonics WM Hybrid Wireless Beltpack Transmitter is straightforward. First, insert the dual lithium AA batteries into the battery compartment. Make sure the O - rings are properly in place to keep it water - resistant. Connect your microphone to the 2.5 mm locking micro audio input jack. You can adjust the frequency using the control panel mounted membrane switches. The selectable output power (50, 100 or 250 mW) lets you balance battery life and operating range according to your needs. When it comes to compatibility, the programmable modes allow you to use it with different receivers. For best results, operate it within the specified frequency ranges. Keep the transmitter away from extreme heat and moisture, even though it's designed for wet and dusty environments. Regularly check the O - rings for wear and tear and replace them if necessary. After use, turn it off to save battery power. If you're not using it for a long time, remove the batteries to prevent leakage.
