Lectrosonics ACOAXTX 36-Inch Coaxial Antenna with SMA Connector, Block 25

The Lectrosonics ACOAXTX coaxial antenna is about 36 inches long and comes with an SMA connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block, marked with a color band and tag for easy identification. This antenna is a great choice when you need a small remote antenna. It's useful in situations where you need to separate the equipment from the antenna. For example, in a multichannel bag system, standard whip antennas may be less effective due to RF interference inside the bag. With this coaxial antenna, you can place it on the bag strap. Also, if clothing or other gear might cover or affect equipment performance, you can position the antenna where it works best. Remember, for maximum effectiveness, the antenna should be vertical, either pointing up or down. Each half of the antenna is cut to 1/4 wavelength of the block. When using it, keep the antenna section away from metal surfaces. The orientation of the remaining cable doesn't affect the antenna's performance.

Using this Lectrosonics coaxial antenna is easy. First, make sure to place it vertically, either pointing up or down, to get the best results. You can position it on the bag strap if you're using a multichannel bag system to avoid RF interference. Or, if clothing or other gear might cover the equipment, find a spot where the antenna can work effectively. When setting it up, keep the antenna section away from metal surfaces as this can affect its performance. There's no need to worry about the orientation of the remaining cable, as it doesn't impact how well the antenna works. For maintenance, just keep it clean and dry. Check the color band and tag regularly to ensure you're using the right frequency block. That's all you need to know to get the most out of your coaxial antenna.