Product Detail
The DPA 4080-DC-D-B00 Core Cardioid Microphone in sleek black with a MicroDot connector is a top - choice for challenging acoustic setups. Unlike omnidirectional mics, this cardioid lavalier mic captures the human voice with remarkable clarity. It offers excellent side rejection and sharp sonic focus on the subject, making it perfect for broadcast, conferences, and live performances in the studio or on - site.
This mic comes with acoustic pre - equalization, providing a 4 dB presence boost. When placed on the chest, it makes the voice stand out and improves speech intelligibility. Its lightweight design and superb speech reproduction are highly appreciated by professionals.
It's delivered with a pre - mounted black pop filter in a holder with an integrated shock mount on a clip, along with an additional white pop filter. The flexible mounting solution allows the mic to be adjusted in all directions, fitting both left - and right - buttoned shirts.
Technical Specs:
Directional pattern: Cardioid
Principle of operation: Pressure gradient
Cartridge type: Pre - polarized condenser
Frequency response: 20 Hz - 20 kHz
Effective frequency range, +/-2 dB, at 25 cm (9.8 in): 250 Hz - 17 kHz with typ. 4 dB soft boost at 4 - 6 kHz (-5 dB at 100 Hz)
Sensitivity, nominal, +/-3 dB at 1 kHz: 20 mV/Pa; -34 dB re. 1 V/Pa
Equivalent noise level, A - weighted: Typ. 23 dB(A) re. 20 uPa (max. 26 dB(A))
Distortion, THD < 1% - Legacy: 120 dB SPL RMS, 123 dB SPL peak
Distortion, THD < 1% - CORE: 126 dB SPL RMS, 129 dB SPL peak
Dynamic range: Typ. 100 dB
Max. SPL, THD 10%: 134 dB SPL peak
Rated output impedance: 30 - 40 OHM
Cable drive capability: Up to 300 m (984 ft) with DAD6001 - BC XLR Adapter
Power supply (for full performance): For wireless systems: Min. 5 V - max. 10 V through DPA adapter; With DAD6001 - BC: P48 (Phantom Power). Will work from 12 V
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001 - BC XLR Adapter
Connector: MicroDot, TA4F Mini - XLR, 3 - pin LEMO, Mini - Jack
Color: Black
Weight: 15 g (0.5 oz) incl. Cable and MicroDot connector
Microphone diameter: 5.7 mm (0.22 in)
Microphone length: 30 mm (1.2 in)
Cable length: 1.2 m (3.9 ft)
Cable diameter: 1.6 mm (0.06 in)
Polarity: Positively increasing sound pressure produces positive going voltage on MicroDot pin
Temperature range: -40°C to 45°C (-40°F to 113°F)
Relative humidity (RH): Up to 90%
Using the DPA 4080 Core Cardioid Microphone is easy. First, choose the appropriate connector according to your equipment, like the MicroDot, TA4F Mini - XLR, 3 - pin LEMO, or Mini - Jack. Attach the mic to your clothing using the clip with the integrated shock mount. You can adjust the mic's direction easily to fit your shirt type.
When it comes to power, if you're using a wireless system, make sure the voltage is between 5V and 10V through the DPA adapter. With the DAD6001 - BC XLR Adapter, you can use P48 Phantom Power or at least 12V.
Here are some things to keep in mind. Avoid exposing the mic to extreme temperatures outside the range of -40°C to 45°C (-40°F to 113°F) and high humidity above 90%. Also, be careful not to subject the mic to very high sound pressure levels that could cause distortion.
For maintenance, keep the pop filters clean. You can gently remove any dust or debris. If you're not using the mic for a long time, store it in a dry and cool place. And don't forget to check the cable regularly for any signs of damage.
